HSS replacement blade 3 x 19 x 153 mm for parting-off tool holder
€13.00*
% €15.00* (13.33% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
The HSS blade is inserted into a parting tool holder and can be used for both grooving and parting off. A major advantage is that the knife can be sharpened or ground depending on the application.
Technical data
| Blade height [mm]: | 19 |
|---|---|
| Blade length [mm]: | 153 |
| Blade thickness [mm]: | 3 |
| Tool material Knife: | HSS |
| Workpiece material: | Universal |
Replacement blade made from high-speed steel (HSS)
5% cobalt alloy for better heat and wear resistance
Knife dimensions: 3 x 19 x 153 mm
Customised grinding for universal steel processing
Matching parting-off tool holder available from us
Description of the
The HSS blade has a parting width of 3 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the blade angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
You can also obtain the corresponding parting steel holder for this HSS knife from us.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
Scope of delivery
- 1 x HSS replacement blade 157 x 3 x 19 mm
More about the brand and products from
The HSS blade has a parting width of 3 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the blade angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
You can also obtain the corresponding parting steel holder for this HSS knife from us.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The HSS blade has a parting width of 1.5 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The HSS blade has a grooving width of 1.6 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The HSS blade has a parting width of 2 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The HSS blade has a grooving width of 2 mm and is suitable for the parting-off tool holder from our "Knurling tool and parting-off tool set" with item number 23035. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The HSS blade has a parting width of 2.5 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The HSS blade has a parting width of 3 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
HSS replacement blade for mini parting-off tool holder
You can also find the matching holder in our shop.
Please note that the blade is already pre-ground. However, the chip breaker must be reground.
€13.00*
Content: 1 Piece
€7.00*
Content: 1 Piece
€3.50*
Content: 1 Piece
€10.50*
Content: 1 Piece
€4.00*
Content: 1 Piece
€10.50*
Content: 1 pcs
€13.00*
Content: 1 Piece
€2.50*
Content: 1 pcs
13 June 2023 20:20
Alles io !
Alles io !
16 February 2020 00:00
Alles gut.
Bisher nicht viel genutzt.
4 January 2020 00:00
Bis jetzt alles OK
Ich habe Ihren Stahl bis jetzt bei leichter Arbeit mit Messing benutzt. Schöner Span , stabil , kein rattern . Ich bin gespannt wie meine Erfahrung wird wenn ich an Niro-Stahl rangehe.