Knurling pliers with two wheels, 10 x 10 mm
Intended use
Knurling tools are used to stamp a profile onto a shaft by pressure forming. Depending on the type of knurling tool, knurls parallel to the axis or cross knurls can be produced, for example. Knurling can be used to make smooth surfaces on shafts easier to grip. This technique is often used for adjusting screws, vise handles or various screw plugs.
Technical data
| Cross-section of clamping shank [mm]: | 10 x 10 |
|---|---|
| Knurling type: | Cross knurl |
| Material knurling wheels: | Carbon steel, hardened |
| Pitch cross knurl [mm]: | 1,0 |
| Total length [mm]: | 110 |
| Width of knurling wheels [mm]: | 9 |
| Workpiece diameter [mm]: | 10 - 35 |
| Ø knurling wheels [mm]: | 19 |
For cross knurls 1.0 mm
For workpiece diameters from 10 to 35 mm
Self-centring
Knurling wheels made from hardened carbon steel
For embossing a cross knurl profile onto a shaft
Description of the
These adjustable knurling pliers are designed for shaft diameters from 10 to 35 mm. Adjustment is made using a knurled screw. Cross knurls of 1.0 mm can be produced. The knurling wheels are made of hardened carbon steel.
Scope of delivery
- 1 x knurling pliers with two wheels, 10 x 10 mm
More about the brand and products from
