Live centre point MK4
€27.90*
% €30.50* (8.52% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centre punch (often also called a centre point or rolling centre punch) is one of the most important tools when working with a lathe. It is used to secure the tailstock so that long, thin and heavy workpieces can be machined safely and accurately. Centre punches are mainly used at higher speeds.
Technical data
| Base body material: | C45E heat-treated steel |
|---|---|
| Concentricity (max.) [mm]: | 0,015 |
| Material lace: | 40Cr heat-treated steel |
| Morse taper recording: | MK4 |
| Point angle [°]: | 60 |
| Speed (max.) [rpm]: | 2.800 |
| Total length [mm]: | 204 |
| Ø bearing housing [mm]: | 63,5 |
| Ø tip [mm]: | 28 |
One of the most important accessories for a lathe
For securing long, thin and heavy workpieces
Concentricity: max. 0.015 mm
Steel tip, hardened and ground
Further sizes (MK0 - MK4) in our range
Description of the
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
Scope of delivery
- 1 x centre point MK4
More about the brand and products from
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
This adjustable fixed centre point is an accessory for lathes and is used for taper turning and cone turning. It enables lateral adjustment of the workpiece support without moving the lathe’s tailstock using the traditional method. This allows conical workpieces to be machined in a controlled manner with reduced setup effort. The centre point is fixed and does not rotate with the workpiece. It is used to support the workpiece between centres and is particularly suitable for applications where robust and simple support is required when turning conical shapes. The centre angle is 60°, making it suitable for typical centring tasks in turning operations. The centre point can be moved laterally by up to +/- 7 mm using the adjustment mechanism. This allows the desired taper or cone to be precisely set. The scale aids controlled adjustment and facilitates repeatable setting for suitable applications. With an overall length of 153 mm and a tip diameter of 24 mm, the centre point is designed for use on compatible lathes. The MK2 + MK3 version enables attachment to machines with a matching Morse taper mount. The adjustable fixed centre point is suitable for machining cones, tapered fits, adaptors, sleeves and similar workpiece shapes. It is a practical solution for users who wish to produce tapered workpieces on a lathe without having to reposition the tailstock themselves.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1,500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1,500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 8,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 8,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 6,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The steel tip is hardened and ground, which increases the resilience and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The steel tip is hardened and ground, which increases the resilience and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
€27.90*
Content: 1 pcs
€52.00*
Content: 1 Piece
€22.90*
Content: 1 Piece
€31.90*
Content: 1 Piece
€18.50*
Content: 1 pcs
€20.50*
Content: 1 Piece
€22.00*
Content: 1 pcs
€16.90*
Content: 1 pcs
€122.90*
Content: 1 Piece
€117.90*
Content: 1 Piece
€153.90*
Content: 1 Piece
€12.00*
Content: 1 pcs
€12.00*
Content: 1 pcs
22 August 2021 00:00
Mitlaufende Körnerspitze Zentrierspitze MK4
sehr gutes Produkt für diesen Preis
8 August 2020 00:00
wertig
gutes Teil in Profiqualität
1 April 2019 00:00
Einwandfrei
Einwandfreie Funktion und eine super Qualität
7 January 2019 00:00
Gut
Gut
16 September 2018 00:00
1A
1A
13 February 2016 00:00
Preis / Leistung perfekt
30 September 2012 00:00
Gute Qualität zu angemessenem Preis