Magnetic tape incl. profile rail, length 1,000 mm (KA800mc-1000)
€110.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Magnetic tapes are a component of digital position measuring systems. In combination with the appropriate read head / sensor, movements or position changes are recorded and shown on a connected display. Magnetic measuring systems are low-wear, stable and robust against vibrations, shocks and environmental influences.
Technical data
| Depth [mm]: | 9 |
|---|---|
| Distance between fixing holes [mm]: | 988 |
| Height [mm]: | 15 |
| Length of magnetic tape [mm]: | 972 |
| Resolution [mm]: | 0,005 |
| Total length [mm]: | 1.000 |
Compatible with position indicator SDS 200 and SDS 200S
Total length 1,000 mm
Resolution 0.005 mm
Mounted on profile rail
Ready to mount and can be shortened
Description of the
For quick and easy installation on the machine tool, the magnetic tape is already attached to a profile rail, the end caps of which are provided with fixing holes. The film on the magnetic tape provides protection against damage and contamination and serves to maintain the magnetic pattern and therefore the accuracy of the magnetic tape. The magnetic tape is compatible with the SDS 200 and SDS 220S position indicators and has a length of 995 mm; the total length of the profile rail is 1,000 mm. The measuring strip can be customised by shortening it. As the end caps are available separately, several shorter measuring strips can be produced from one measuring strip.
Procedure for shortening a magnetic tape profile rail:
- Remove both end caps
- Pull the protective film out of the profile rail (do not remove the magnetic tape)
- Shorten the profile rail including the magnetic tape (e.g. with a hacksaw)
- Shorten the protective film (e.g. with scissors)
- Cut two M3 threads on the cut edge of the profile rail to be able to mount the end cap
- Slide the protective film over the magnetic tape into the profile rail
- Fit the end caps
Scope of delivery
- 1 x magnetic tape incl. profile rail, length 1,000 mm (KA800mc-1000mm)
More about the brand and products from
Further information on our professional line
For quick and easy installation on the machine tool, the magnetic tape is already attached to a profile rail, the end caps of which are provided with fixing holes. The film on the magnetic tape provides protection against damage and contamination and serves to maintain the magnetic pattern and therefore the accuracy of the magnetic tape. The magnetic tape is compatible with the SDS 200 and SDS 220S position indicators and has a length of 995 mm; the total length of the profile rail is 1,000 mm. The measuring strip can be customised by shortening it. As the end caps are available separately, several shorter measuring strips can be produced from one measuring strip.
Procedure for shortening a magnetic tape profile rail:
- Remove both end caps
- Pull the protective film out of the profile rail (do not remove the magnetic tape)
- Shorten the profile rail including the magnetic tape (e.g. with a hacksaw)
- Shorten the protective film (e.g. with scissors)
- Cut two M3 threads on the cut edge of the profile rail to be able to mount the end cap
- Slide the protective film over the magnetic tape into the profile rail
- Fit the end caps
For quick and easy installation on the machine tool, the magnetic tape is already attached to a profile rail whose end caps are provided with fixing holes. The film on the magnetic tape provides protection against damage and contamination and serves to maintain the magnetic pattern and therefore the accuracy of the magnetic tape. The magnetic tape is compatible with the SDS 200 and SDS 220S position indicators and has a length of 272 mm; the total length of the profile rail is 300 mm. The measuring strip can be customised by shortening it. As the end caps are available separately, several shorter measuring strips can be produced from one measuring strip.
Procedure for shortening a magnetic tape profile rail:
- Remove both end caps
- Pull the protective film out of the profile rail (do not remove the magnetic tape)
- Shorten the profile rail including the magnetic tape (e.g. with a hacksaw)
- Shorten the protective film (e.g. with scissors)
- Cut two M3 threads on the cut edge of the profile rail to be able to mount the end cap
- Slide the protective film over the magnetic tape into the profile rail
- Fit the end caps
For quick and easy installation on the machine tool, the magnetic tape is already attached to a profile rail, the end caps of which are provided with fixing holes. The film on the magnetic tape provides protection against damage and contamination and serves to maintain the magnetic pattern and therefore the accuracy of the magnetic tape. The magnetic tape is compatible with the SDS 200 and SDS 220S position indicators and has a length of 495 mm, the total length of the profile rail is 500 mm. The measuring strip can be customised by shortening it. As the end caps are available separately, several shorter measuring strips can be produced from one measuring strip.
Procedure for shortening a magnetic tape profile rail:
- Remove both end caps
- Pull the protective film out of the profile rail (do not remove the magnetic tape)
- Shorten the profile rail including the magnetic tape (e.g. with a hacksaw)
- Shorten the protective film (e.g. with scissors)
- Cut two M3 threads on the cut edge of the profile rail to be able to mount the end cap
- Slide the protective film over the magnetic tape into the profile rail
- Fit the end caps
For quick and easy installation on the machine tool, the magnetic tape is already attached to a profile rail, the end caps of which are provided with fixing holes. The film on the magnetic tape provides protection against damage and contamination and serves to maintain the magnetic pattern and therefore the accuracy of the magnetic tape. The magnetic tape is compatible with the SDS 200 and SDS 220S position indicators and has a length of 795 mm, the total length of the profile rail is 800 mm. The measuring strip can be customised by shortening it. As the end caps are available separately, several shorter measuring strips can be produced from one measuring strip.
Procedure for shortening a magnetic tape profile rail:
- Remove both end caps
- Pull the protective film out of the profile rail (do not remove the magnetic tape)
- Shorten the profile rail including the magnetic tape (e.g. with a hacksaw)
- Shorten the protective film (e.g. with scissors)
- Cut two M3 threads on the cut edge of the profile rail to be able to mount the end cap
- Slide the protective film over the magnetic tape into the profile rail
- Fit the end caps
€110.00*
Content: 1 pcs
€39.00*
Content: 1 pcs
€69.00*
Content: 1 pcs
€95.00*
Content: 1 pcs