Milling head Ø 40 mm with MK3 / M12 inserts
Intended use
Cutter heads are mainly used for face milling of surfaces, as their larger milling diameter means fewer passes are required compared to shank milling cutters. They can also be used to mill steps on surfaces. Key advantages of milling heads over, for example, HSS roller face milling cutters are the standardised indexable inserts, which enable very high cutting performance to be achieved. Depending on the material to be machined, inserts with different coatings can be used.
Technical data
| Number of cutting edges: | 3 |
|---|---|
| Surface coating of cutting insert: | TiAlN |
| Tool holder: | MK3 / M12 |
| Total length [mm]: | 127 |
| Ø milling head [mm]: | 40 |
Milling head Ø 40 mm with cutting inserts
Three cutting edges
MK3 tool holder with M12 clamping thread
For chamfering and face milling
Description of the
This milling head / cutter head with MK3 shank is suitable for face and shoulder milling. It is not suitable for plunging into a workpiece. Thanks to its MK3 shank, this milling cutter can be inserted directly into the tool holder; no additional milling arbour is required.
Scope of delivery
- 1 x milling head Ø 40 mm with MK3 / M12 indexable inserts
- 1 x Torx spanner
More about the brand and products from
This milling head / cutter head with MK3 shank is suitable for face and shoulder milling. It is not suitable for plunging into a workpiece. Thanks to its MK3 shank, this milling cutter can be inserted directly into the tool holder; no additional milling arbour is required.
This end mill with MK2 shank is suitable for producing grooves with a width of 20 mm, for shoulder milling and for milling over smaller flat surfaces. It is not suitable for plunging into a workpiece. Thanks to its MK2 shank, this milling cutter can be inserted directly into the tool holder; no collets are required.
This end mill with MK3 shank is suitable for producing grooves with a width of 25 mm, for shoulder milling and for milling over smaller flat surfaces. It is not suitable for plunging into a workpiece. Thanks to its MK3 shank, this milling cutter can be inserted directly into the tool holder; no collets are required.
Milling head / cutter head Ø approx. 25 mm with 2 cutting inserts
tool holder MK2 / M10
incl. 2 indexable inserts
The matching indexable insert can be found under item number 13430.
Milling head / cutter head Ø approx. 30 mm with 2 cutting inserts
Tool holder MK3 / M12
incl. 2 indexable inserts
The matching indexable insert can be found under item number 13431.
€45.50*
Contents: 1 pcs
€39.50*
Contents: 1 pcs
€45.00*
Contents: 1 pcs
€29.50*
Contents: 1 pcs
€29.50*
Contents: 1 pcs
25 June 2025 08:58
Funktioniert problemlos mit einem Top Ergebnis auf
Funktioniert problemlos mit einem Top Ergebnis auf Guss-Alu Material.
8 December 2024 12:45
Gut und Günstig
Für den Preis völlig in Ordnung. Mit diesem Fräskopf kann man schnell viel Material abnehmen. Die entstehende Oberfläche ist ok. Ein Problem könnte die Motorleistung der Fräsmaschine sein. Ich besitze eine SIEG SU1 in der High Body Ausführung bei der der Z-Achsen- Weg deutlich erhöht wurde. Paulimot hat diese Maschine nicht mehr im Programm, dabei ist meiner Meinung nach nur diese Maschine in dem Preissegment um 1600€ steif genug um Stahl genau bearbeiten zu können. Die Übersetzung des Riementriebes im Antriebskopf beträgt original 2:1 (30:60 Zähne) Der Motor ist bürstenlos und hat 500 Watt. Mit dieser Konfiguration hat die Maschine Mühe mit dem 40mm Fräskopf und Stahl. Ich habe daher mit Riemenscheiben und Riemen von Mädler die Übersetzung auf 3,27:1 (22:72 Zähne) geändert. Damit funktioniert der Fräskopf einwandfrei und das Setup passt auch eher zu den Arbeiten die mit der Fräsmaschine ausführe, dem Herstellen und Reparieren von Teilen für meine Oldtimer.
16 December 2023 12:57
Flächen und Absatzfräser
Ideal zum Fräsen größerer Fächen! In einwandfreiem Zustand angekommen. Gutes Preis-Leistungsverhältnis.
18 February 2023 07:44
Fräskopf 40 mm
Bevor ich den Messerkopf bestellt habe, lies ich mich vom Support beraten. Der Kontakt war nett und kompetent. Es wurden alle meine Fragen zufriedenstellend beantwortet. Ich habe eine Sieg SX2L. Dann habe ich online bestellt und alles schnell geliefert bekommen. Leider war der Messerkopf schadhaft. Ich habe mich an den Support gewand und dann noch Fotos geschickt. Das wars. Habe sofort ein Rücksendeticket erhalten und den Messerkopf zurück geschickt. 5 Tage später hatte ich den neuen. So soll es sein. So geht Service. Der Messerkopf arbeitet so, wie es sein muss. Ich bin super zufrieden.
7 September 2022 09:19
Fräskopf wurde leider defekt geliefert. Wurde aber
Fräskopf wurde leider defekt geliefert. Wurde aber sofort nach Beanstandung zur vollen Zufriedenheit neue Schneidplatten geliefert.