Milwaukee 2 x HSS-G RED COBALT metal drill bits 4 mm according to DIN 338
€6.30*
% €7.85* (19.75% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
Metal drills, also known as twist drills, are used in machining. They are used to drill cylindrical holes in metal workpieces.
Technical data
| Nominal diameter [mm]: | 4 |
|---|---|
| Total length [mm]: | 75 |
| Working length [mm]: | 43 |
| Ø clamping shank [mm]: | 4 |
4 mm nominal diameter
Made of HSS steel, cobalt alloyed (5 % cobalt), polished surface
Suitable for working on high-alloy steel and stainless steel
Precise spot drilling without centre punching
Increased heat resistance
Description of the
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
Scope of delivery
- 2 x HSS-G RED COBALT metal drill bits 4 mm
More about the brand and products from
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
These twist drills for metalworking are made from extremely heat-resistant, cobalt-alloyed HSS steel and comply with DIN 338. The surface of the drill bits is polished. The 135° drill bit tip with cross-grinding enables precise spot drilling without centre punching. The four cutting edges ensure rapid chip evacuation and therefore less heat generation and therefore a longer service life. The drill bits are suitable for machining high-alloy steel and metal with a strength of up to 1000 N/mm², such as acid and heat-resistant steel and stainless steel. The drill core has a conical design and becomes stronger towards the shank. This strengthens the drill bit and increases the service life of the spiral. From a nominal diameter of 5 millimetres, these drill bits have a 3-face clamping shank for a better hold in the drill chuck.
€6.30*
Content: 1 pcs
€5.20*
Content: 1 pcs
€5.20*
Content: 1 pcs
€4.90*
Content: 1 pcs
€4.90*
Content: 1 pcs
€5.20*
Content: 1 pcs
€5.90*
Content: 1 pcs
€6.30*
Content: 1 pcs
€3.60*
Content: 1 pcs
€3.60*
Content: 1 pcs
€5.80*
Content: 1 pcs
€5.80*
Content: 1 pcs
€6.30*
Content: 1 pcs
€6.30*
Content: 1 pcs
€7.70*
Content: 1 pcs
€8.00*
Content: 1 pcs
€9.50*
Content: 1 pcs
€10.60*
Content: 1 pcs
€14.90*
Content: 1 pcs
€19.00*
Content: 1 pcs
€24.50*
Content: 1 pcs