Skip to main content

Milwaukee C12 C charger 12 volt

Intended use

Battery chargers are used to recharge discharged or partially discharged batteries.

Technical data

Battery capacity [Ah]: 2,0, 3,0, 4,0, 6,0
Charging connection: 1 x M12
Charging time [min.]: 40, 70, 80, 130
WEEE reg. no.: EN 95902713
Wall mounting possible: Yes
for Li-Ion batteries: Yes

Charges all M12 REDLITHIUM batteries

Overheating protection due to electronic temperature control

REDLITHIUM 3.0 Ah / 4.0 Ah batteries are charged in max. 60 min. / 80 min.

REDLITHIUM 1.5 Ah / 2.0 Ah batteries are charged in max. 30 min. / 40 min.

Description of the

All M12 REDLITHIUM batteries can be charged with this charger. The electronic temperature control optimises the charging rate and thus protects against overheating and increases the service life of the battery. The LEDs light up gradually to indicate the current charge status of the battery.

Scope of delivery

  • 1 x Milwaukee C12 C charger 12 volt

More about the brand and products from 

Product comparison
Article image
A red Milwaukee C12 C charger, 12 volt, with a black base and top-mounted battery holder. The top is grooved and bears the brand logo.
Red Milwaukee M12-M18C charger with ventilation slots and black power cable. There is a black label with manufacturer information on the front.
Milwaukee M12 starter set: charger and two M12 REDLITHIUM 4.0Ah batteries in red and black.
Milwaukee M18 starter set: Red charger and two black 18V batteries with red accent colour and "REDLITHIUM M18" inscription.
Milwaukee M18 starter set: Two 5.0 Ah batteries, one 2.0 Ah battery and one charger. Batteries are red-black, charger is red.
Product title
Milwaukee C12 C charger 12 volt
Milwaukee M12-M18C charger 12/14/18 volt
Milwaukee M12NRG-402 12V starter set
Milwaukee M18NRG-202 18 V starter set
Milwaukee M18NRG-502 18 V starter set
Valuation
Description of the

All M12 REDLITHIUM batteries can be charged with this charger. The electronic temperature control optimises the charging rate and thus protects against overheating and increases the service life of the battery. The LEDs light up gradually to indicate the current charge status of the battery.

All M12, M14 and M18 REDLITHIUM batteries can be charged with this charger. It can be equipped with two batteries to be charged at the same time. Thanks to the sequential charging ("first in, first charge" technology), the batteries are charged in the order in which they are loaded, which optimises the charging time of the individual batteries.

This set contains two 4.0 amp batteries and a charger. The batteries are equipped with REDLINK electronics. This is a complex, electronic power management system. This controls the communication between the device and battery to optimise the ratio of runtime to power. The built-in overload protection prevents damage by switching off immediately in the event of an overload. The temperature management system and individual cell monitoring ensure maximum service life. All M12 REDLITHIUM batteries can be charged with the charger.

This set contains two 2.0 amp batteries and a charger. The batteries are equipped with REDLINK electronics. This is a complex, electronic power management system. This controls the communication between the device and battery to optimise the ratio of runtime to power. The built-in overload protection prevents damage by switching off immediately in the event of an overload. The temperature management system and individual cell monitoring ensure maximum service life.
The charger can be used to charge all M12, M14 and M18 REDLITHIUM batteries. It can be equipped with two batteries to be charged at the same time. Thanks to sequential charging ("first in, first charge" technology), the batteries are charged in the order in which they are loaded, which optimises the charging time of the individual batteries.

This set contains two 5.0 amp batteries, one 2.0 amp battery and a quick charger. The batteries are equipped with REDLINK electronics. This is a complex, electronic power management system. This controls the communication between the device and battery to optimise the ratio of runtime to power. The built-in overload protection prevents damage by switching off immediately in the event of an overload. The temperature management system and individual cell monitoring ensure maximum service life.
The charger can be used to charge all M12, M14 and M18 REDLITHIUM batteries. It can be equipped with two batteries to be charged at the same time. Thanks to sequential charging ("first in, first charge" technology), the batteries are charged in the order in which they are loaded, which optimises the charging time of the individual batteries.

Price

€86.50*

Content: 1 pcs

€96.80*

Content: 1 pcs

€159.00*

Content: 1 pcs

€209.00*

Content: 1 pcs

€299.00*

Content: 1 pcs

Battery capacity [Ah]
2,0; 3,0; 4,0; 6,0
2,0; 4,0; 5,0; 6,0; 9,0; 12
4,0
2,0
2,0; 5,0
Charging connection
1 x M12
1 x M12; 1 x M18
1 x M12
1 x M12; 1 x M18
1 x M12; 1 x M18
Charging time [min.]
40; 70; 80; 130
40; 80; 100; 124; 180
40; 70; 80; 130
40; 80; 100; 124; 180
26; 50; 52; 95
WEEE reg. no.
EN 95902713
EN 95902713
EN 95902713
EN 95902713
EN 95902713
Wall mounting possible
Yes
Yes
Yes
Yes
Yes
for Li-Ion batteries
Yes
Yes
-
-
-
Loading procedure
-
sequential
individually
sequential
sequential
Battery type
-
-
Li-ion
Li-ion
Li-ion
Voltage [V]
-
-
12
18
12; 18
Weight [kg]
-
-
0,4
0,4
0,2; 0,7
System
-
-
M12
M18
M12; M18

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.

Excellent

Very good

Good

Acceptable

Unsatisfactory

This site is protected by reCAPTCHA and the Privacy Policy and Terms of Use apply.

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden, Deutschland
info.ce@tti-emea.com