Milwaukee step drill 4 - 12 mm, 1 mm steps
€46.10*
% €57.60* (19.97% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
A step drill, also known as a taper drill or taper step drill, is a special drilling tool that is used to drill holes in metal, plastic and other materials. In contrast to conventional twist drills, a step drill has a gradually increasing diameter structure. Step drills are commonly used in metalworking, electronics assembly, automotive workshops and other applications where precise holes of various diameters are required. They are particularly useful for installations where screws or bolts need to be fastened into metal plates, as they can drill holes of different sizes quickly and efficiently.
Technical data
| Drill diameter step drill [mm]: | 4 - 12 |
|---|---|
| Number of steps: | 9 |
| Shank diameter step drill [mm]: | 6 |
| Total length of step drill: | 65 |
RAPID STRIKET drill point for easier centring
For clean and burr-free drill holes
Centre punching, drilling and deburring in one step
Made from special steel with black oxide coating
Optimised for use with cordless tools
Description of the
This step drill is ideal for drilling in alloyed and unalloyed sheet metal, profiles, pipes, copper, brass, aluminium, stainless steel and plastics. The use of coolant is recommended to increase tool life. The step drill bit is made of special steel and has a black oxide coating. The special drill point and special step geometry enable chatter-free drilling. Each step is relief-ground for optimum drill feed and automatic deburring. The shank has three clamping surfaces so that the step drill can be securely clamped in a drill chuck. The respective diameter is laser-marked on the step drill.
Scope of delivery
- 1 x Milwaukee Step drill 4 - 12 mm, 1 mm steps
More about the brand and products from
This step drill is ideal for drilling in alloyed and unalloyed sheet metal, profiles, pipes, copper, brass, aluminium, stainless steel and plastics. The use of coolant is recommended to increase tool life. The step drill bit is made of special steel and has a black oxide coating. The special drill point and special step geometry enable chatter-free drilling. Each step is relief-ground for optimum drill feed and automatic deburring. The shank has three clamping surfaces so that the step drill can be securely clamped in a drill chuck. The respective diameter is laser-marked on the step drill.
Universal step drill 4 - 12 mm, HSS - 5% cobalt alloyed
- Total length 66 mm
- Drill step diameters 4, 5, 6, 7, 8, 9, 10, 11 and 12 mm
- Hexagonal shank (prevents slipping in the drill chuck)
- Step length 4 mm
- 5% cobalt alloy for higher heat resistance
For burr-free drilling and reaming of sheet metal, pipes and profiles. Works without burrs or chatter marks and can be used in hand or pillar drills.
Universal step drill 6 - 24 mm, HSS - 5% cobalt alloyed
- Total length 80 mm
- Drill step diameters 6, 8, 10, 12, 14, 16, 18, 20, 22 and 24 mm
- Hexagonal shank (prevents slipping in the drill chuck)
- Step length 4 mm
- 5% cobalt alloy for higher heat resistance
For burr-free drilling and reaming of sheet metal, pipes and profiles. Works without burrs or chatter marks and can be used in hand or pillar drills.
This step drill is ideal for drilling in alloyed and unalloyed sheet metal, profiles, pipes, copper, brass, aluminium, stainless steel and plastics. The use of coolant is recommended to increase tool life. The step drill bit is made of special steel and has a black oxide coating. The special drill point and special step geometry enable chatter-free drilling. Each step is relief-ground for optimum drill feed and automatic deburring. The shank has three clamping surfaces so that the step drill can be securely clamped in a drill chuck. The respective diameter is laser-marked on the step drill.
This set consists of two step drills and eight HSS-G metal drill bits in five different diameters. The step drills are ideal for drilling in alloyed and unalloyed sheet metal, profiles, pipes, copper, brass, aluminium, stainless steel and plastics. The use of coolant is recommended to increase tool life. The step drills are made of special steel and have a black oxide coating. The special drill point and special step geometry enable chatter-free drilling. Each step is relief-ground for optimum drill feed and automatic deburring. The shank has three clamping surfaces so that the step drills can be securely clamped in a drill chuck. The respective diameter is laser-marked on the step drills.
The twist drills are made of HSS steel and comply with DIN 338. The 135° drill bit tip with cross-grinding in accordance with DIN 1412 C enables precise spot drilling without centre punching. The THUNDERWEB spiral shape ensures rapid chip evacuation and therefore less heat generation and therefore a longer tool life. Compared to roll-rolled twist drills, these drills achieve up to 40 % faster drilling progress and up to 50 % lower feed force. THUNDERWEB drills are suitable for machining alloyed and unalloyed steel with a strength of up to 900 N/mm².
€46.10*
Content: 1 pcs
€11.00*
Content: 1 pcs
€21.00*
Content: 1 pcs
€56.90*
Content: 1 pcs
€108.00*
Content: 1 pcs