Mounting flange for lathe chuck Ø 200 mm with cylindrical mount
€99.00*
% €115.00* (13.91% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Description of the
Mounting flange for lathe chuck Ø 200 mm with cylindrical mount
- for lathe chuck Ø 200 mm with 3-hole mounting
- Pre-machined on the chuck side, the centring shoulder must be finish-turned on the machine to ensure maximum concentricity
More about the brand and products from
Mounting flange for lathe chuck Ø 200 mm with cylindrical mount
- for lathe chuck Ø 200 mm with 3-hole mounting
- Pre-machined on the chuck side, the centring shoulder must be finish-turned on the machine to ensure maximum concentricity
Mounting flange for lathe chuck Ø 160 mm with cylindrical holder for lathes PM3900, PM4000, SIEG SC10 & SC12
- for lathe chuck Ø 160 mm with 3- or 4-hole mounting
- Pre-machined on the chuck side, the centring shoulder and the contact surface must be finish-machined on the machine to ensure maximum concentricity.
This adapter flange with D1-5 Camlock mount is used for mounting lathe chucks or collet flanges with a cylindrical mount. It is particularly suitable for mounting chucks or flanges with a diameter of 200 mm and a three-hole mounting. Machine-side attachment to the lathe is performed via the D1-5 Camlock interface in accordance with DIN 55029. This quick-change system enables a secure, backlash-free and repeatable connection between the spindle and the adapter flange. On the chuck side, the adapter flange is pre-machined. The centring shoulder and the flat contact surface are oversized and must be finished on the respective lathe whilst the adapter is mounted. Finishing on the machine ensures optimal alignment with the spindle axis, thereby achieving the best possible concentricity of the chuck once it is mounted.
This flange is required to mount the 4-jaw chuck (order no. 4051) on the lathe PM190-V.
Mounting flange for 4-jaw chuck with 4-hole mounting
This flange is required to mount the 4-jaw chuck (order no. 4053) on the PM2000, PM2500, PM2700, PM3600, PM2500-V & PM2700-V lathes.
This flange is required to mount the 4-jaw chuck (order no. 4055) on the lathe PM3800.
Pre-machined on the chuck side, the centring shoulder and the contact surface must be finish-turned on the machine to ensure maximum concentricity.
This flange is required to mount 3- and 4-jaw chucks on the SIEG SC4 lathe.
This adapter flange made of cast steel has a cylindrical inner fit of 55 mm on the spindle side and three M6 threads on a 66 mm pitch circle. There are a total of six mounting holes for M8 hexagon socket screws on an 84 mm pitch circle. On the chuck side, this flange has a cylindrical outer fit with a diameter of 72 mm.
€99.00*
Content: 1 pcs
€89.00*
Content: 1 pcs
€99.00*
Content: 1 pcs
€24.90*
Content: 1 pcs
€37.00*
Content: 1 pcs
€46.90*
Content: 1 pcs
€17.50*
Content: 1 Piece
€17.90*
Content: 1 Piece
24 February 2026 15:40
Montageflansch 200 mm Camlock
Ich habe stets gute Erfahrung mit Produkten Von Paulimot
10 July 2022 07:25
passt
passt
22 September 2020 00:00
Paulimot 1A
Alles was ich bei Paulimot bestellt habe und auch telefonische Auskunft waren bis jetzt absolut perfekter Service. 1a wie man sagt i
17 April 2020 00:00
Sehr guter Geschäftspartner
Wie immer, waren wir mi PAULIMOT der zufrieden.
22 February 2018 00:00
Gute Artikelbeschreibung.
Passgenau und gut vorgearbeitet.