Number punch set 36 pieces, font height: 3 mm
Intended use
A punch number set is used for punching and engraving letters and numbers on different materials. These materials include steel, plastic, wood, aluminium, brass and copper. With the help of a punch number set, you can, for example, add a number or name to nameplates or workpieces and personalise them.
Technical data
| Font height [mm]: | 3 |
|---|---|
| Hardness [HRC]: | 40 - 50 |
| Length of chisel [mm]: | 65 |
| Workpiece material: | Steel |
| Workpiece material: | Wood |
| Workpiece material: | Aluminium, Copper, Plastic, Steel, Wood, brass |
| Workpiece material: | Copper |
| Workpiece material: | Aluminium |
| Workpiece material: | Plastic |
36-piece set
Sturdy pins for precise application
Embossing possible on a variety of different materials
Character height: 3 mm
Supplied in a practical storage box
Description of the
This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters achieve a character height of 3 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.
To achieve an even typeface, proceed as follows:
- Place the desired letter / number on the material to be punched.
- Now hit the punching pin with a hammer to punch the desired letter / number.
- Depending on the material being punched, you can remove the material pressed away by the embossing using emery paper or sandpaper, for example.
- The depth, width and height of the embossing depends on the impact force used.
Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.
Scope of delivery
- 26 x punch letter (A to Z)
- 9 x striking number (0 to 8)
- 1 x &-sign
More about the brand and products from
