Pair of prisms with clamping brackets, each 46 x 42 x 36 mm up to 32 mm
Intended use
A pair of prisms is required for parallel clamping, scribing, aligning and checking cylindrical workpieces or shafts. It is particularly recommended for drilling, milling, grinding and inspection work.
Technical data
| Clamping range gr. prism [mm]: | 3 - 32 |
|---|---|
| Clamping range small prism [mm]: | 3 - 25 |
| Hardness [HRC]: | 50 - 60 |
| Tool material: | Hardened, Steel |
| Tool material: | Hardened |
| Total height [mm]: | 35 |
| Total length [mm]: | 46 |
| Total width [mm]: | 42 |
For parallel clamping, scribing, aligning and checking cylindrical workpieces or shafts
Dimensions (L x W x H): 46 x 42 x 36 mm
Hardened and precision-ground on all sides
Clamping range: 3 - 32 mm
Tolerance for parallelism and perpendicularity: max. 0.01 mm
Description of the
Each prism has two milled V-slots with a 90° angle for clamping round material. The stable clamp allows the prism blocks to be used on the side surface including the base. The maximum height difference between the two prisms is 0.005 mm.
The small prism has a clamping range of 3 to 26 mm, the large prism from 3 to 32 mm. This means that round material with a diameter of 3 to 32 mm can be clamped.
The parallelism of opposing surfaces, the parallelism and perpendicularity of the V-grooves in relation to all surfaces and the perpendicularity of the neighbouring outer surfaces is max. 0.01 mm. The flatness of the working surfaces is max. 0.005 mm.
The pair of prisms is made of steel, has a hardness of 50 to 60 HRC and is precision ground on all sides.
Scope of delivery
- 2 x prism 46 x 42 x 36 mm
- 2 x clamping brackets
More about the brand and products from
