Pair of prisms with clamping brackets, each 70 x 63 x 45 mm up to 38 mm
Intended use
A pair of prisms is required for parallel clamping, scribing, aligning and checking a cylindrical workpiece.
Technical data
| Clamping range gr. prism [mm]: | 4 - 38 |
|---|---|
| Clamping range small prism [mm]: | 4 - 28 |
| Hardness [HRC]: | 55 - 60 |
| Tool material: | Steel |
| Total height [mm]: | 45 |
| Total length [mm]: | 70 |
| Total width [mm]: | 63 |
For parallel clamping, scribing, aligning and checking a cylindrical workpiece
Dimensions (L x W x H): 70 x 63 x 45 mm
Hardened and precision-ground on all sides
Clamping range: 4 - 38 mm
Clamping brackets do not protrude, so 6 contact surfaces can be used with each prism
Description of the
The pair of prisms allows you to clamp, mark out, align or check a cylindrical workpiece in parallel.
Each prism has two milled V-slots with a 90° angle for clamping round material. The stable clamp allows the prism blocks to be used on the side surface including the base. It should be emphasised that the clamping brackets of this pair of prisms do not protrude beyond the blocks, which means that each prism has 6 support surfaces.
The small prism has a clamping range from 4 to 28 mm, the large prism from 4 to 38 mm. This means you can clamp round material with a diameter of 4 to 38 mm.
The parallelism of opposing surfaces, the parallelism and perpendicularity of the V-grooves in relation to all surfaces and the perpendicularity of the neighbouring outer surfaces is 0.01 mm. The flatness of the working surfaces is 0.005 mm.
The pair of prisms is made of steel, has a hardness of 55 to 60 HRC and is precision ground on all sides.
Scope of delivery
- 2 x prism 70 x 63 x 45 mm
- 2 x clamping brackets
More about the brand and products from
