Pair of quadruple prisms, 95 x 71 x 36 mm each
Intended use
A pair of prisms is required for parallel clamping, scribing, aligning and checking cylindrical workpieces or shafts. The use of such a pair of prisms is particularly recommended for drilling, milling, grinding and inspection work.
Technical data
| Total height [mm]: | 95 |
|---|---|
| Total length [mm]: | 70 |
| Total width [mm]: | 35 |
| Width of the V-grooves [mm]: | 20, 30, 40, 50 |
For parallel clamping of cylindrical workpieces
Precision ground on all sides
Tolerance for parallelism and perpendicularity max. 0.01 mm
Dimensions (L x W x H): 70 x 35 x 95 mm
Clamping range 5 - 70 mm
Description of the
Each prism has four milled V-grooves with a 90° angle for clamping round material. The maximum height difference between the two prisms is 0.005 mm.
The four prisms of different sizes allow shafts or round materials from 5 to 70 mm to be clamped.
The parallelism of opposing support surfaces, the parallelism and perpendicularity of the V-grooves in relation to all surfaces and the perpendicularity of the neighbouring outer surfaces is max. 0.01 mm. The flatness of the working surfaces is max. 0.005 mm.
The prism pair is precision ground on all sides.
Scope of delivery
- 2 x quadruple prisms, 70 x 35 x 95 mm
More about the brand and products from
