Parting tool holder, shank height 16 mm, with HSS blade (8 % cobalt)
€34.00*
% €35.50* (4.23% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A parting-off steel can be used either for parting off or for grooving. A major advantage of parting steel holders with HSS knives is that the knives can be resharpened depending on the application requirements. For example, the grooving width can be reduced or the angle changed by grinding the blade. The thinner the cutting edge, the more delicate the work can be. The holder also allows you to securely clamp and quickly adjust the holder.
Technical data
| Blade height [mm]: | 13 |
|---|---|
| Blade length [mm]: | 110 |
| Blade thickness [mm]: | 2 |
| Clamping shank [mm]: | 16 |
| Cobalt content in the material of the knife [%]: | 8 |
| Knife surface: | ground |
| Surface holder: | nickel-plated |
| Tool material Knife: | HSS |
| Workpiece material: | Universal |
HSS blade: 2 x 13 x 110 mm
HSS blade with 8 % cobalt alloy for improved heat and wear resistance
Quick adjustment and secure clamping of the blade using three screws
Shank height of the holder: 16 mm
Surface finished with nickel plating
Description of the
In order to be able to carry out grooving and parting-off work, the parting-off steel holder is clamped in a steel holder. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 110 x 13 x 2 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.
The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The parting steel holder is surface-tempered by nickel plating. The nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of nickel surfaces is their visual enhancement.
Scope of delivery
- 1 x cut-off steel holder with shank height 16 mm
- 1 x HSS blade 8 % cobalt alloyed
- 1 x Allen key
More about the brand and products from
Further information on our professional line
In order to be able to carry out grooving and parting-off work, the parting-off steel holder is clamped in a steel holder. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 110 x 13 x 2 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.
The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The parting steel holder is surface-tempered by nickel plating. The nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of nickel surfaces is their visual enhancement.
The parting steel holder with HSS blade has a parting width of 1.6 mm. The blade can be ground differently depending on the material of the workpiece. This enables universal material processing.
In contrast to many similar cut-off holders, this version is equipped with an eccentric clamping system. The biggest advantage of this clamping technology is the ease of use of the holder. The knife can be adjusted effortlessly with just one screw. The holder is adapted to the shape of the blade, ensuring precise and secure clamping.
The plunge-cut chisel is made from high-quality steel. The surface is hardened, ground and burnished. The burnished finish protects the surface against corrosion.
A replacement blade for the holder is also available from us.
Please note that the blade is already pre-ground. However, the chip breaker must be reground.
The matching replacement blade is also available from us.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The matching replacement blade is also available from us.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The matching replacement blade is also available from us.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The parting-off tool holder is clamped in a steel holder in order to be able to carry out parting-off and grooving work. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. This parting-off tool holder is particularly suitable for small machines thanks to its low shaft height of 6 mm.
The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
In order to be able to carry out grooving and parting-off work, the parting-off steel holder is clamped in a steel holder. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 100 x 12 x 2.5 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.
The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The parting-off tool holder is clamped in a steel holder in order to be able to carry out parting-off and grooving work. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 120 x 15 x 3 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.
The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
The parting-off tool holder is clamped in a steel holder in order to be able to carry out parting-off and grooving work. There are three tension screws on the top of the holder, which can be tightened or loosened using the Allen key. The 153 x 19 x 3 mm cut-off blade is particularly suitable for grooving and parting off during your turning work, as these dimensions give the blade a high degree of inherent stability, which in turn helps to increase the maximum grooving depth.
The blade can be sharpened or ground depending on the intended use. For example, the plunge width can be reduced or the blade angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The five per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the durability of the blade.
Please note that the blade is already pre-ground. However, the chip breaker must be reground.
€34.00*
Content: 1 pcs
€8.00*
Content: 1 Piece
€4.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€23.50*
Content: 1 Piece
€24.50*
Content: 1 pcs
€30.50*
Content: 1 Piece
€29.00*
Content: 1 Piece
23 January 2025 19:04
Ausgezeichnete Qualität wie immer, vielen Dank!
Alles Tip Top vielen Dank!
19 March 2024 19:06
Sehr gutes Werkzeug 👍
Sehr zufrieden mit der Qualität des Abstechwerkzeugs. Paulimot liefert nach meiner Erfahrung immer brauchbares Werkzeug 👍. Absolute Empfehlung
20 December 2022 14:45
Ich bin zufrieden
Ich bin zufrieden
13 October 2022 17:29
Abstechhalter mit HSS Messer 2x13x110
Sauber verarbeitet
3 August 2022 07:04
Promte Lieferung und sehr gute Qualität
Promte Lieferung und sehr gute Qualität
14 May 2022 06:23
Nach ersten kleinen Einsätzen scheint alles zu
Nach ersten kleinen Einsätzen scheint alles zu passen. Gute Qualität zu gutem Preis. Als Amateur bin ich sehr zufrieden, was Paulimot mir bietet.
16 March 2022 19:00
Gute Qualität
Gute Qualität
6 October 2021 00:00
Absolut in Ordnung
Verarbeitung und Qualität ist in Ordnung. Für den Heimwerker vollkommen ausreichend. Bei der Verwendung gelten die üblichen Parameter (Schmierung, Spitzenhöhe, Drehzahl, Maschinensteifigkeit etc.) und damit kann vernünftig gearbeitet werden. Bisher keine Probleme damit. Der Preis ist attraktiv. Würde ich jederzeit bedenkenlos wieder kaufen.
15 September 2021 00:00
alles prima
alles in Ordnung wie immer
22 August 2021 00:00
Qualitativ hochwertiger Abstechstahlhalter
Gut verarbeiteter Abstechstahlhalter, das Messer macht was es soll.