Pin punch 8-piece set
Intended use
A pin punch (also known as a drift punch) is used to drive in or drive out dowel pins, grooved pins or shear pins (split pins).
Technical data
| Tip diameter [mm]: | 1,6, 2,4, 3,2, 4,0, 4,8, 5,6, 6,4, 8,0 |
|---|---|
| Tip diameter [mm]: | 1,6 |
| Tip diameter [mm]: | 3,2 |
| Tip diameter [mm]: | 2,4 |
| Tip diameter [mm]: | 5,6 |
| Tip diameter [mm]: | 4,0 |
| Tip diameter [mm]: | 6,4 |
| Tip diameter [mm]: | 8,0 |
| Tip diameter [mm]: | 4,8 |
| Total length [mm]: | 102 |
| Total length [mm]: | 102 |
| cyl. part short driver [mm]: | 15 |
8-piece set with pin punches in short design
For driving in or driving out dowel pins, grooved pins, shear pins or split pins
With burnished surface for corrosion protection
Knurled handle for better grip
In a practical storage bag
Description of the
This set consists of 8 short pin punches. They have tip diameters from 1.6 to 8.0 mm and a tip length of 15 mm. All eight pin punches are burnished to protect against corrosion.
You can drive rivets and pins into or out of holes with different diameters and lengths using these pin punches. The knurled surface ensures that the handles have a better grip. The knurling is present on all handles.
The pin punch set is supplied in a storage bag. In this bag, the individual pin punches are labelled with the respective size in inches and millimetres.
Scope of delivery
- 8 x short pin punches Ø 1.6 to 8.0 mm
More about the brand and products from
