Precision high-speed centre point with live centre, MK3
€122.90*
% €127.00* (3.23% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
A centre punch (often also called a centre point or rolling centre punch) is one of the most important tools when working with a lathe. It is used to secure the tailstock so that long, thin and heavy workpieces can be machined safely and accurately. Centre punches are mainly used at higher speeds.
Technical data
| Concentricity (max.) [mm]: | 0,003 |
|---|---|
| Morse taper recording: | MK3 |
| Point angle [°]: | 60 |
| Speed (max.) [rpm]: | 8.000 |
| Tool material: | Rolling bearing steel |
| Total length [mm]: | 174 |
| Ø bearing housing [mm]: | 54 |
| Ø tip [mm]: | 22 |
One of the most important accessories for a lathe
For securing long, thin and heavy workpieces
Concentricity: max. 0.003 mm
Steel tip, hardened and ground
Further sizes (MK0 - MK4) in our range
Description of the
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 8,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
Scope of delivery
- 1 x precision high-speed centre punch tip, MK3
More about the brand and products from
Further information on our professional line
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 8,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
This adjustable fixed centre point is an accessory for lathes and is used for taper turning and cone turning. It enables lateral adjustment of the workpiece support without moving the lathe’s tailstock using the traditional method. This allows conical workpieces to be machined in a controlled manner with reduced setup effort. The centre point is fixed and does not rotate with the workpiece. It is used to support the workpiece between centres and is particularly suitable for applications where robust and simple support is required when turning conical shapes. The centre angle is 60°, making it suitable for typical centring tasks in turning operations. The centre point can be moved laterally by up to +/- 7 mm using the adjustment mechanism. This allows the desired taper or cone to be precisely set. The scale aids controlled adjustment and facilitates repeatable setting for suitable applications. With an overall length of 153 mm and a tip diameter of 24 mm, the centre point is designed for use on compatible lathes. The MK2 + MK3 version enables attachment to machines with a matching Morse taper mount. The adjustable fixed centre point is suitable for machining cones, tapered fits, adaptors, sleeves and similar workpiece shapes. It is a practical solution for users who wish to produce tapered workpieces on a lathe without having to reposition the tailstock themselves.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1,500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1,500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 8,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 6,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The steel tip is hardened and ground, which increases the resilience and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The steel tip is hardened and ground, which increases the resilience and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
€122.90*
Content: 1 Piece
€52.00*
Content: 1 Piece
€22.90*
Content: 1 Piece
€31.90*
Content: 1 Piece
€18.50*
Content: 1 pcs
€20.50*
Content: 1 Piece
€22.00*
Content: 1 pcs
€27.90*
Content: 1 pcs
€16.90*
Content: 1 pcs
€117.90*
Content: 1 Piece
€153.90*
Content: 1 Piece
€12.00*
Content: 1 pcs
€12.00*
Content: 1 pcs
3 January 2022 00:00
Top !!!
Très bon produit
10 August 2020 00:00
Werkzeugergänzung "Drehen" für PM 4000 mit Meßsystem
Preis und Leistung sind stimmig.
1 September 2019 00:00
Funktioniert sehr gut
Eine sehr gute Verarbeitung und nur 1/100mm Schlag. So macht das Arbeiten mit der Körnerspitze Spaß.
2 July 2019 00:00
top
excellent!