Precision quick-action drill chuck 1 - 16 mm MK2 / M10
€55.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with a cylindrical shank, such as drills, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines or drilling machines. Depending on the type of machine, a drill chuck with a suitable holder is required. A general distinction is made between drill chucks in which the tools are clamped with a spanner and drill chucks in which the tools can be clamped without a spanner, so-called quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 16 |
|---|---|
| Concentricity deviation max. [mm]: | 0,05 |
| Cone mandrel: | MK2 / M10 |
| Ø drill max. [mm]: | 16 |
Fast, secure clamping and releasing
No spanner required
Suitable for use on lathes and drills
For clamping tools with a cylindrical shank
Maximum concentricity deviation: 0.05 mm
Description of the
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use on milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
Scope of delivery
- 1 x Precision quick-action drill chuck 1-16 mm MK2 / M10
More about the brand and products from
Further information on our professional line
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use on milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-action drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
€55.50*
Content: 1 Piece
€51.50*
Content: 1 pcs
€24.00*
Content: 1 pcs
€26.50*
Content: 1 pcs
€29.00*
Content: 1 pcs
€33.50*
Content: 1 pcs
5 April 2024 14:37
Hervorragendes Preis-/Leistungsverhältnis
Habe es seit 1 1/2 Jahren im Einsatz und kann ehrlich gesagt keinen nennenswerten Nachteil gegenüber meinem Röhmfutter 1-13 MK2/M10 auf der anderen Maschine feststellen. Das Futter musste auch einiges an Fehlbedienung verkraften, hat dies klaglos hingenommen und läuft rund wie am ersten Tag. Ich freue mich bei jedem Spannen über den sauberen Kraftschluss und verzichte öfter als es gut wäre auf Spannzangen.
19 January 2024 18:47
Gut
Gut
4 March 2023 12:17
Tolles Bohrfutter
Sehr, sehr gutes Bohrfutter! Es lohnt sich dieses Bohrfutter zu kaufen. Super Rundlauf, einfach klasse!
3 February 2023 18:07
Gutes Bohrfutter
Bin damit sehr zufrieden.
5 August 2022 16:25
Ein Bohrfutter aus einem Stück gefertigt. Super.
Dieses Bohrfutter ist eine echte ergänzung für größere Werkzeuge an meiner Bohr - / Fräßmaschine F 207-V. Ich glaube sogar gemerkt zu haben das die Klemmung im Futter in zwei abschnitten erfolgt. Habe ein sicheres und vom Rundlauf des Bohrfutters gutes gefühl beim benutzen auf der Maschine.
29 April 2022 11:12
Bohrfutter
Ware super Schnelle Lieferung gerne wieder
21 April 2022 15:20
Zentriert gut beim Bohren mit der Fräse.
Zentriert gut beim Bohren mit der Fräse. Sehr gute Preis-/Leistungsverhältnis. Mit zusätzlichem Austreiblappen auch auf Drehbänken mit Reitstockaufnahme MK2 zu verwenden.
11 April 2022 16:42
QUALITÄT UND VERARBEITUNG IST SEHR GUT. PREIS LEISTUNG
QUALITÄT UND VERARBEITUNG IST SEHR GUT. PREIS LEISTUNG IST ANGEMESSEN.
18 March 2022 09:25
Schnelle Lieferung, tolles Produkt, gerne wieder!
Schnelle Lieferung, tolles Produkt, gerne wieder!
16 January 2022 00:00
Präzisionsarbeit
Mit dem Bohrfutter bin ich sehr zufrieden. Ich hatte mir ein normales Bohrfutter ausgeborgt, weil bei der Lieferung der Fräße kein Bohrfutter dabei war. Das schlug aus und ich konnte damit nicht arbeiten. Ich dachte schon, es ist die Maschine, die unrund läuft. Doch das Präzisionsbohrfutter schob alle Bedenken bei Seite. Es ist ein sehr schönes Arbeiten damit.