Pull-down vice 26 mm jaw width
€35.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Description of the
Pull-down vice
Jaw width: 26 mm
Jaw height: 6.5 mm
Clamping range max.: 23 mm
Total height: 30 mm
More about the brand and products from
Pull-down vice
Jaw width: 26 mm
Jaw height: 6.5 mm
Clamping range max.: 23 mm
Total height: 30 mm
This rotating machine vice is made of C45E steel and is particularly characterised by its pull-down system. A guide carriage runs under the movable clamping jaw, which moves the clamping jaw forwards and pulls it downwards at the same time. This solves the problem of tilting and workpieces remain securely clamped even under high force.
The vice can be rotated and is equipped with an angle scale, making it easy and convenient to carry out angle milling.
Using the guide blocks included in the scope of delivery, the vice can be quickly and easily aligned parallel to the grooves in the worktable.
Pull-down vice
Jaw width: 38 mm
Jaw height: 20 mm
Clamping range max.: 44 mm
Total height: 45 mm
incl. hexagon socket spanner
Pull-down vice
Jaw width: 63 mm
Jaw height: 32 mm
Clamping range max.: 85 mm
Total height: 63 mm
This two-part, very solid pull-down vice is made of nodular cast iron (cast iron with spheroidal graphite). Spheroidal graphite cast iron is a type of cast iron that has mechanical properties similar to steel due to the carbon contained in its spherical shape.
The replaceable jaws made of C45E steel are hardened and ground. The grooves milled into the jaws increase the holding force, making it more difficult for the workpiece to slip out. This two-part vice can be used to clamp both larger workpieces and workpieces whose clamping surfaces are not parallel to each other on the machine table.
Due to the design of this type of pull-down vice, the forces exerted when clamping the workpiece act very strongly in the direction of the machine table, preventing the workpiece from standing up during milling. The solid design ensures that the workpiece is clamped securely and quickly. The vice is fastened with clamping elements such as sliding blocks with threaded rods and collar nuts.
This two-piece, very solid pull-down vice is made of nodular cast iron (cast iron with spheroidal graphite). Spheroidal graphite cast iron is a type of cast iron which has mechanical properties similar to steel due to the carbon contained in its spherical shape. The replaceable jaws made of C45E steel are hardened and ground. The grooves milled into the jaws increase the holding force, making it more difficult for the workpiece to slip out. This two-part vice can be used to clamp both larger workpieces and workpieces whose clamping surfaces are not parallel to each other on the machine table. Due to the design of this type of pull-down vice, the forces exerted when clamping the workpiece act very strongly in the direction of the machine table, preventing the workpiece from standing up during milling. The solid design ensures that the workpiece is clamped securely and quickly. The vice is fastened with clamping elements such as sliding blocks with threaded rods and collar nuts.
Pull-down vice
Jaw width: 88 mm
Jaw height: 40 mm
Clamping range max.: 117 mm
Total height: 85 mm
This rotating machine vice is made of C45E steel and is particularly characterised by its pull-down system. A guide carriage runs under the movable clamping jaw, which moves the clamping jaw forwards and pulls it downwards at the same time. This solves the problem of tilting and workpieces remain securely clamped even under high force.
The vice can be rotated and is equipped with an angle scale, making it easy and convenient to carry out angle milling.
Using the guide blocks included in the scope of delivery, the vice can be quickly and easily aligned parallel to the grooves in the worktable.
Pull-down vice
Jaw width: 100 mm
Jaw height: 45 mm
Clamping range max.: 125 mm
Total height: 90 mm
This rotating machine vice is made of C45E steel and is particularly characterised by its pull-down system. A guide slide runs under the movable clamping jaw, which moves the clamping jaw forwards and pulls it downwards at the same time. This solves the problem of tilting and workpieces remain securely clamped even under high force.
The vice can be rotated and is equipped with an angle scale, making it easy and convenient to carry out angle milling. Using the guide blocks included in the scope of delivery, the vice can be quickly and easily aligned parallel to the grooves in the worktable.
€35.50*
Content: 1 pcs
€76.00*
Content: 1 Piece
€47.00*
Content: 1 pcs
€58.50*
Content: 1 pcs
€160.00*
Content: 1 Piece
€239.00*
Content: 1 pcs
€118.00*
Content: 1 pcs
€98.00*
Content: 1 Piece
€148.00*
Content: 1 pcs
€117.00*
Content: 1 pcs
5 September 2023 18:17
Mit kleinen Nacharbeiten zu gebrauchen
für kleine Teile besonders durch die „integrierten“ Parallelunterlagen gut zu gebrauchen, musste die lose Backe nacharbeiten, da fehlte die Nut in der Ecke, mit der Flex ging das fix. Habe mir für die Befestigung einen Adapter aus Alu für 50mm Raster gefräst, dazu hat der Schraubstock auf der Unterseite 2 m4 Gewinde, die muss man alle ein wenig nachschneiden. Wenn man ihn mit Spannpratzen befestigen will: die sollten maximal 5mm dick sein, hier wären sicher die ein oder anderen zusätzlichen Maße hilfreich. Alles in allem bin ich für den Preis soweit zufrieden, Versand war mal wieder abartig schnell, so wie man das fast schon gewohnt ist :)
1 August 2022 14:04
Qualität und Preis/Leistung für den Hobbybereich sehr
Qualität und Preis/Leistung für den Hobbybereich sehr gut!
25 April 2021 00:00
Premium-Waren
Waren kamen schnell, Waren waren in Ordnung, können sich nicht alle unsere nur ok beschweren. Kann nur empfehlen, mit Paulimot zu handeln
7 January 2020 00:00
Ideal zum Spannen kleiner Teile
Pünktlich - wie gewohnt - kam das Produkt gut verpackt an und machte einen guten Eindruck.
2 July 2019 00:00
niedlich der Kleine
für den Modellbau ein genauer Schraubstock für kleine Teile
3 October 2018 00:00
gewohnte Qualität
gewohnte Qualität, zum guten Preis
10 February 2018 00:00
Super Qualität
Super Qualität und schnelle Lieferung. Produkt und shop sehr empfehlenswert
26 December 2015 00:00
Sehr zu empfehlen!
Perfekt für den Mikromodellbau, man braucht nur kleine Spannpratzen um den Schraubstock auf dem Frästisch zu befestigen oder Winkel mit Langloch.
9 December 2014 00:00
gute verarbeitung preis -leistung ist exellent!
erfüllt die erwartugen voll und ganz.
26 August 2014 00:00
Alles Bestens
Ich würde mir ein Befestigungs-System wünschen - Bietet der Hersteller so etwas an ?