Quick-action drill chuck 1-13 mm + taper arbor MK3 / B16
€19.90*
% €23.50* (15.32% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Chucks are used to clamp tools with cylindrical shanks, such as drill bits, countersinks, reamers, etc. Chucks are used in machine tools such as lathes, milling machines and drilling machines. Depending on the type of machine, a drill chuck with a suitable mounting is required. A general distinction is made between drill chucks in which tools are clamped using a key and those in which tools can be clamped without a key – known as quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 13 |
|---|---|
| Concentricity deviation max. [mm]: | 0,1 |
| Cone mandrel: | MK3 / B16 |
| Inner cone: | B16 |
| Total length [mm]: | 198 |
| Ø drill max. [mm]: | 13 |
Quick, secure clamping and release
No clamping key required
Suitable for use on lathes and drilling machines
For clamping tools with a cylindrical shank
Tapered mandrel and drill chuck connected via a taper
Description of the
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Scope of delivery
- 1 x quick-action drill chuck 1–13 mm + tapered mandrel MK3 / B16
More about the brand and products from
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
€19.90*
Contents: 1 pcs
€47.50*
Contents: 1 Piece
€21.90*
Contents: 1 pcs
€23.50*
Contents: 1 pcs
€26.50*
Contents: 1 pcs
23 January 2023 08:07
Top Qualität zu einem guten Preis...
Qualität & Preis stimmen, der Versand erfolgte umgehen! Immer wieder gerne!
16 October 2022 08:40
Bohrfutter
Gutes Bohrfutter, ist ok
13 June 2022 08:15
Optisch sehr schön,Preis -Leistung ist ok.Qualität ist
Optisch sehr schön,Preis -Leistung ist ok.Qualität ist nach kurzer Verwendung noch nicht zu beurteilen.