Quick-action drill chuck for clockwise and anti-clockwise rotation 1 - 13 mm SK30 / M12
€40.90*
% €48.50* (15.67% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with cylindrical shanks, such as drill bits, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines and drilling machines. Depending on the type of machine, a drill chuck with a suitable mounting is required. Generally, a distinction is made between drill chucks in which the tools are clamped using a key and those in which the tools can be clamped without a key – known as quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 13 |
|---|---|
| Concentricity deviation max. [mm]: | 0,1 |
| Cone mandrel: | SK30 (DIN 2080) / M12 / B16 |
| Inner cone: | B16 |
| Ø drill max. [mm]: | 13 |
Suitable for both clockwise and anti-clockwise rotation thanks to the locking mechanism
Quick, secure clamping and release
No clamping key required
With clamping thread, suitable for use on milling machines
Tapered mandrel and drill chuck connected via a taper
Description of the
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-action drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
Scope of delivery
- 1 x quick-release drill chuck for clockwise and anti-clockwise rotation, 1–13 mm, SK30 / M12
More about the brand and products from
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-action drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
With this precision quick-action drill chuck, the tapered arbor and the drill bit holder consist of one part, i.e. the tapered arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the steep taper and is therefore suitable for use on milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Notes: Drill chucks are not suitable for milling work. Due to the DIN standard, this drill chuck is particularly suitable for milling machines with a lockable spindle.
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the steep taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-action drill chuck has a locking mechanism that prevents the drill chuck from loosening in anti-clockwise rotation. As a result, unlike conventional quick-action drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
€40.90*
Contents: 1 pcs
€59.90*
Contents: 1 Piece
€39.90*
Contents: 1 pcs
€43.90*
Contents: 1 pcs