Quick-release drill chuck for clockwise and anti-clockwise rotation 1 - 13 mm MK3
€23.50*
% €27.50* (14.55% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with cylindrical shanks, such as drill bits, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines and drilling machines. Depending on the type of machine, a drill chuck with a suitable mounting is required. A general distinction is made between drill chucks in which the tools are clamped using a key and those in which the tools can be clamped without a key – so-called quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 13 |
|---|---|
| Concentricity deviation max. [mm]: | 0,1 |
| Cone mandrel: | MK3 / B16 |
| Inner cone: | B16 |
| Ø drill max. [mm]: | 13 |
Suitable for clockwise and anti-clockwise rotation thanks to its locking mechanism
Quick, secure clamping and release
No clamping key required
Suitable for use on lathes and drilling machines
Tapered mandrel and drill chuck connected via a taper
Description of the
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Scope of delivery
- 1 x quick-release drill chuck for clockwise and anti-clockwise rotation, 1–13 mm, MK3
More about the brand and products from
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
€23.50*
Contents: 1 pcs
€47.50*
Contents: 1 Piece
€19.90*
Contents: 1 pcs
€21.90*
Contents: 1 pcs
€26.50*
Contents: 1 pcs
21 June 2025 07:13
Gut und günstig
Gut und günstig
2 January 2023 16:59
Bohrfutter MK 3
Gutes Futter
12 October 2022 12:18
alles Super
alles Super
24 May 2022 09:15
Sehr gutes Bohrutter. Guter Rundlauf.
Sehr gutes Bohrutter. Guter Rundlauf.