Skip to main content

Saw band made of Uddeholm steel for MJ9, 1575 x 6 x 0.4 mm, 6 pcs

Intended use

Uddeholm steel band saw blades are optimised for processing wood. Due to their outstanding quality, they are used in bandsaw machines in the trade, but also in small workshops.

These band saw blades are equally suitable for longitudinal and cross cuts in softwoods and hardwoods.

Technical data

Length [mm]: 1575
Thickness [mm]: 6
Tooth pitch [Zpz]: 6
Width [mm]: 0,4
Material: Uddeholm steel

Made from high-quality, high-strength Uddeholm steel

High load capacity

High cutting quality

Low wear

Regrindable

Description of the

For over 300 years, the name Uddeholm has been synonymous with high-quality steel in industry and trade, meeting the highest standards and making it one of the best starting materials for wood bandsaw blades.

The key features of these bandsaw blades include high resilience, a long service life and a high cutting volume. This is achieved by using an alloyed steel with a high proportion of chromium and vanadium and therefore a high-strength steel structure. This means that even very intensive use does not cause excessive wear.

The set and sharpened tooth tips guarantee a consistently high cutting quality with straight, clean and precise cuts.

The band saw blades are produced in Germany and are not hardened so that they can be resharpened as required. The band is supplied ready for use and can be clamped directly into the MJ9 or any other suitable wood band saw.

Scope of delivery

  • 1 x band saw blade made of Uddeholm steel for MJ9, 1575 x 6 x 0.4 mm, 6 pcs.

More about the brand and products from 

Product comparison
Article image
A round, silver-coloured saw band with teeth. The band is rolled up and lies on a white surface.
Close-up of a black, serrated band saw blade for wood band saws. The teeth are pointed and regularly arranged.
A FlexBack band saw blade, rolled up in a circle. The band is black and has sharp teeth. It lies on a white background.
A round, silver-coloured saw band with teeth. The band is rolled up and lies on a white surface.
A circular steel band saw blade with sharp teeth lies on a white surface. The band saw blade is photographed at a slight angle.
Product title
Saw band made of Uddeholm steel for MJ9, 1575 x 6 x 0.4 mm, 6 pcs
Band saw blade for wood band saw MJ9
Band saw blade FlexBack for MJ9, 1575 x 3 x 0.5 mm, 14 Zpz
Saw band made of Uddeholm steel for MJ9, 1575 x 8 x 0.45 mm, 6 pcs
Saw band made of Uddeholm steel for MJ9, 1575 x 10 x 0.45 mm, 6 pcs
Valuation

Average rating of 5 out of 5 stars

Average rating of 5 out of 5 stars

Average rating of 4.9 out of 5 stars

Average rating of 5 out of 5 stars

Average rating of 4.9 out of 5 stars

Description of the

For over 300 years, the name Uddeholm has been synonymous with high-quality steel in industry and trade, meeting the highest standards and making it one of the best starting materials for wood bandsaw blades.

The key features of these bandsaw blades include high resilience, a long service life and a high cutting volume. This is achieved by using an alloyed steel with a high proportion of chromium and vanadium and therefore a high-strength steel structure. This means that even very intensive use does not cause excessive wear.

The set and sharpened tooth tips guarantee a consistently high cutting quality with straight, clean and precise cuts.

The band saw blades are produced in Germany and are not hardened so that they can be resharpened as required. The band is supplied ready for use and can be clamped directly into the MJ9 or any other suitable wood band saw.

Saw blade for wood band saw MJ9- Saw blade length : 1575 mm- Saw blade width : 6,5 mm

Flexback band saw blades are versatile all-rounders for metal, plastic and wood processing.

The teeth of the band saw blades are hardened in high-performance hardening plants so that they have a significantly longer service life than pure wood saw blades made from Uddeholm steel. At the same time, the set and sharpened tooth tips guarantee a consistently high cutting quality with straight, clean and precise cuts.

The back of the Flexback bandsaw blades is not hardened, which makes the blades more flexible: This is because the flexible structure of the Flexback blades makes it easier to absorb the high stresses in the blade, especially when making contour cuts.

The flexible back and the special tooth shape prevent bending and thus reduce the risk of breakage. They also impress with their long service life, high cutting volume and high load capacity. This means that there is no excessive wear even with intensive use.

The belt is produced in Germany, supplied ready for use and can be clamped directly into the MJ9 or another suitable band saw.

For over 300 years, the name Uddeholm has been synonymous with high-quality steel in industry and trade, meeting the highest standards and making it one of the best starting materials for wood bandsaw blades.

The key features of these bandsaw blades include high resilience, a long service life and a high cutting volume. This is achieved by using an alloyed steel with a high proportion of chromium and vanadium and therefore a high-strength steel structure. This means that even very intensive use does not cause excessive wear.

The set and sharpened tooth tips guarantee a consistently high cutting quality with straight, clean and precise cuts.

The band saw blades are produced in Germany and are not hardened so that they can be resharpened as required. The band is supplied ready for use and can be clamped directly into the MJ9 or any other suitable wood band saw.

For over 300 years, the name Uddeholm has been synonymous with high-quality steel in industry and trade, meeting the highest standards and making it one of the best starting materials for wood bandsaw blades.

The key features of these bandsaw blades include high resilience, a long service life and a high cutting volume. This is achieved by using an alloyed steel with a high proportion of chromium and vanadium and therefore a high-strength steel structure. This means that even very intensive use does not cause excessive wear.

The set and sharpened tooth tips guarantee a consistently high cutting quality with straight, clean and precise cuts.

The band saw blades are produced in Germany and are not hardened so that they can be resharpened as required. The band is supplied ready for use and can be clamped directly into the MJ9 or any other suitable wood band saw.

Price

€15.00*

Content: 1 Piece

€24.00*

Content: 1 pcs

€20.50*

Content: 1 Piece

€15.00*

Content: 1 Piece

€15.00*

Content: 1 Piece

Length [mm]
1575
-
1575
1575
1575
Thickness [mm]
6
-
3
8
10
Tooth pitch [Zpz]
6
-
14
6
6
Width [mm]
0,4
-
0,5
0,45
0,45
Material
Uddeholm steel
-
Tool steel
Uddeholm steel
Uddeholm steel
Surface
-
-
Tooth point hardened
-
-

4 of 4 reviews

Average rating of 5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.

Excellent

Very good

Good

Acceptable

Unsatisfactory

This site is protected by reCAPTCHA and the Privacy Policy and Terms of Use apply.

14 February 2023 10:46

Review with rating of 5 out of 5 stars

Qualität

Immer wieder gerne.

2 December 2021 00:00

Review with rating of 5 out of 5 stars

Bin sehr zufrieden.

Gute Qualität, schnelle Lieferung.

3 May 2021 00:00

Review with rating of 5 out of 5 stars

Alles in Ordnung

Sehr zufrieden.

2 March 2019 00:00

Review with rating of 5 out of 5 stars

Sägebänder

Sägebänder einfach Top !

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Paulitschek Maschinen- und Warenvertriebsgesellschaft mbH
ZeppelinstraĂŸe 3
89231 Neu-Ulm, Deutschland
+49 731 23232
support@paulimot.de