Set of external jaws for paulimot three-jaw chuck, 125 mm
€20.00*
% €23.50* (14.89% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Clamping jaws are an essential component of a lathe chuck. Centrally adjustable lathe chucks are usually fitted with one set of inner (drilling) jaws and one set of outer (turning) jaws. Depending on the application, either of the two types of jaws can be used on the lathe chuck. Outer jaws are tapered inwards towards the centre of the chuck and are particularly suitable for clamping workpieces with larger diameters.
Technical data
| Hardness [HRC]: | 53 - 58 |
|---|---|
| Jaw width [mm]: | 16 |
| Total height [mm]: | 45 |
| Total length [mm]: | 52 |
| Material: | 40Cr steel |
Suitable for paulimot -type three-jaw chucks, 125 mm
Made from 40Cr steel
Hardened and ground
Hardness: 53–58 HRC
Description of the
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
Scope of delivery
- 1 x set of external jaws for three-jaw chuck, 125 mm
More about the brand and products from
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made of 40Cr. steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made of 40Cr steel consists of three stepped outer jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
€20.00*
Contents: 1 pcs
€18.50*
Contents: 1 pcs
€22.50*
Contents: 1 pcs
€16.90*
Contents: 1 pcs
€24.50*
Contents: 1 pcs
€26.90*
Contents: 1 pcs
€29.90*
Contents: 1 pcs
€39.90*
Contents: 1 pcs
€22.00*
Contents: 1 pcs
4 Reviews
11 March 2023 11:06
TOP Preisleistungs Verhältnis
TOP Preisleistungs Verhältnis
21 January 2023 16:18
Azt kaptam amit vártam
Azt kaptam amit vártam
25 August 2022 07:18
Qualität
gute Qualität
21 October 2021 00:00
Alles bestens.
Schnelle und kompetente Abwicklung der Bestellung. Sehr zu empfehlen.