Set of inner jaws for paulimot four-jaw chuck, 125 mm, ZV
€32.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Chuck jaws are an essential component of a lathe chuck. Centrally adjustable lathe chucks are usually equipped with one set of internal or drilling jaws and one set of external or turning jaws. Depending on the application, one of the two jaw variants can be used on the lathe chuck. Internal jaws are stepped outwards from the centre of the chuck and are particularly suitable for clamping workpieces with smaller diameters.
Technical data
| Hardness [HRC]: | 53 - 58 |
|---|---|
| Jaw width [mm]: | 16 |
| Total height [mm]: | 45 |
| Total length [mm]: | 52 |
| Material: | 40Cr steel |
Suitable for paulimot four-jaw chuck, 125 mm
Made from 40Cr steel
Hardened and ground
Degree of hardness: 53 - 58 HRC
Description of the
This set of chuck jaws made from 40Cr steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
Scope of delivery
- 1 x set of inner jaws for four-jaw chuck, 125 mm, centrally adjustable
More about the brand and products from
This set of chuck jaws made from 40Cr steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 40Cr steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 40Cr steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 40Cr steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 40Cr steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 40Cr steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
€32.50*
Content: 1 pcs
€22.50*
Content: 1 pcs
€24.50*
Content: 1 pcs
€36.50*
Content: 1 pcs
€20.50*
Content: 1 pcs
€29.50*
Content: 1 pcs
€36.50*
Content: 1 pcs
€48.00*
Content: 1 pcs
€27.00*
Content: 1 pcs
21 March 2023 16:43
Das Spannfutter ist jetzt besser als neu.
Die Ausführung der Backen ist sehr gut, der Rundlauf im alten Spannfutter ist besser als der den Hersteller garantieren. Kauf und Lieferung waren problemlos und schnell, das Preis-Leistung Verhältnis ist gut.
15 June 2022 10:05
Super schnelle Lieferung und gewohnt tolle Paulimot
Super schnelle Lieferung und gewohnt tolle Paulimot Qualität!