Set of internal jaws for paulimot three-jaw chuck, 125 mm
€24.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Chuck jaws are an essential component of a lathe chuck. Centrally adjustable lathe chucks are usually equipped with one set of internal or drilling jaws and one set of external or turning jaws. Depending on the application, one of the two jaw variants can be used on the lathe chuck. Internal jaws are stepped outwards from the centre of the chuck and are particularly suitable for clamping workpieces with smaller diameters.
Technical data
| Hardness [HRC]: | 53 - 58 |
|---|---|
| Jaw width [mm]: | 16 |
| Total height [mm]: | 45 |
| Total length [mm]: | 52 |
| Material: | 40Cr steel |
Suitable for paulimot three-jaw chuck, 125 mm
Made from 40Cr steel
Hardened and ground
Degree of hardness: 53 - 58 HRC
Description of the
This set of chuck jaws made from 40Cr steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
Scope of delivery
- 1 x set of inner jaws for three-jaw chuck, 125 mm
More about the brand and products from
This set of chuck jaws made from 40Cr steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 40Cr steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 40Cr steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 40Cr steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 40Cr steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 20CrMnTi steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
This set of chuck jaws made from 40Cr steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.
€24.50*
Content: 1 pcs
€22.50*
Content: 1 pcs
€36.50*
Content: 1 pcs
€20.50*
Content: 1 pcs
€29.50*
Content: 1 pcs
€32.50*
Content: 1 pcs
€36.50*
Content: 1 pcs
€48.00*
Content: 1 pcs
€27.00*
Content: 1 pcs
23 April 2024 16:38
Alles bestens.
Alles bestens.
21 March 2023 16:43
Das Spannfutter ist jetzt besser als neu.
Die Ausführung der Backen ist sehr gut, der Rundlauf im alten Spannfutter ist besser als der den Hersteller garantieren. Kauf und Lieferung waren problemlos und schnell, das Preis-Leistung Verhältnis ist gut.
29 September 2022 07:04
Hier stimmt das Preisleistungsverhältnis.
Hier stimmt das Preisleistungsverhältnis.
17 September 2022 11:11
Prodotto con buon rapporto qualità prezzo!
La qualità del prodotto è molto buona , arriva in una scatola e le griffe sono all'interno di buste di nylon leggermente lubrificate. Io ho acquistato il prodotto per il mandrino del mio tornio Nowick e mi ritengo molto soddisfatto.