Go to homepage
Wish list
Shopping cart €0.00*
Start menu Jaws for lathe chucks Back

Set of internal jaws for paulimot three-jaw chuck, 80 mm

Three inner jaws for a three-jaw chuck, made of steel, hardened and ground. The jaws have stepped clamping surfaces and guide grooves.
Four four-jaw chuck inner jaws in black, with ribbed surfaces. The jaws are lined up in a row.
Technical drawing of inner jaws for an 80mm three-jaw chuck. The drawing shows different views with dimensions.
Assembly example: Three-jaw chuck with inserted inner jaws. The jaws are provided with steps and engage in the chuck. paulimot Logo visible.
Three inner jaws for a three-jaw chuck are positioned next to each other. The jaws are made of hardened steel and have a serrated surface.
Three inner jaws for a three-jaw chuck, made of steel, hardened and ground. The jaws have stepped clamping surfaces and guide grooves.
Four four-jaw chuck inner jaws in black, with ribbed surfaces. The jaws are lined up in a row.
Technical drawing of inner jaws for an 80mm three-jaw chuck. The drawing shows different views with dimensions.
Assembly example: Three-jaw chuck with inserted inner jaws. The jaws are provided with steps and engage in the chuck. paulimot Logo visible.
Three inner jaws for a three-jaw chuck are positioned next to each other. The jaws are made of hardened steel and have a serrated surface.

€20.50*

Prices incl. 19% VAT. plus Shipping costs

Delivery time: 1-3 working days **

More than 10 pieces available (online and in specialist shops)

pcs

To the wish list

Remove from the wish list

Questions about the article?

Item number: 4120
EAN: 4260665671120
Gross weight: 0,184 kg

Intended use

Chuck jaws are an essential component of a lathe chuck. Centrally adjustable lathe chucks are usually equipped with one set of internal or drilling jaws and one set of external or turning jaws. Depending on the application, one of the two jaw variants can be used on the lathe chuck.
Internal jaws are stepped outwards from the centre of the chuck and are particularly suitable for clamping workpieces with smaller diameters.

Technical data

Hardness [HRC]: 53 - 58
Jaw width [mm]: 12
Total height [mm]: 33
Total length [mm]: 32
Material: 40Cr steel

Suitable for paulimot three-jaw chuck, 80 mm

Made from 40Cr steel

Hardened and ground

Degree of hardness: 53 - 58 HRC

Description of the

This set of chuck jaws made from 40Cr steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.

Scope of delivery

  • 1 x set of inner jaws for three-jaw chuck, 80 mm

More about the brand and products from 

Product comparison
Article image
Three inner jaws for a three-jaw chuck, made of steel, hardened and ground. The jaws have stepped clamping surfaces and guide grooves.
Three inner jaws for a three-jaw chuck, made of steel, with serration. The jaws are lined up against a white background.
Three inner jaws for a three-jaw chuck, made of steel, hardened and ground, for centred clamping of workpieces, positioned next to each other on a white background.
Three grey inner jaws for a three-jaw chuck, made of steel. The jaws are stepped and numbered to ensure centred clamping.
Four grey inner jaws for a four-jaw chuck, all aligned and visible in detail on a white background.
Four milled, silver inner jaws for a four-jaw chuck, with notches on the underside, lie next to each other on a white background.
Four grey, wedge-shaped inner jaws for a four-jaw chuck, photographed from the side, lying next to each other on a white background.
Four four-jaw chuck inner jaws in grey, with serration and steps, lie next to each other against a white background.
Four grey inner jaws for an 80mm four-jaw chuck with stepped jaws and guide grooves, insulated on a white background.
Product title
Set of internal jaws for paulimot three-jaw chuck, 80 mm
Set of internal jaws for paulimot three-jaw chuck, 100 mm
Set of internal jaws for paulimot three-jaw chuck, 125 mm
Set of internal jaws for paulimot three-jaw chuck, 200 mm
Set of inner jaws for paulimot four-jaw chuck, 100 mm, ZV
Set of inner jaws for paulimot four-jaw chuck, 125 mm, ZV
Set of inner jaws for paulimot four-jaw chuck, 160 mm, ZV
Set of inner jaws for paulimot four-jaw chuck, 200 mm, ZV
Set of inner jaws for paulimot four-jaw chuck, 80 mm, ZV
Link
Valuation
Description of the

This set of chuck jaws made from 40Cr steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.

This set of chuck jaws made from 40Cr steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.

This set of chuck jaws made from 40Cr steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.

This set of chuck jaws made from 20CrMnTi steel consists of three stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.

This set of chuck jaws made from 40Cr steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.

This set of chuck jaws made from 40Cr steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.

This set of chuck jaws made from 20CrMnTi steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.

This set of chuck jaws made from 20CrMnTi steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.

This set of chuck jaws made from 40Cr steel consists of four stepped inner jaws. The jaws are hardened and ground and numbered on the inside of the guide groove. This numbering allows the jaws to be inserted into the lathe chuck in the correct order to ensure that the workpiece is clamped in the centre of the chuck.

Price

€20.50*

Content: 1 pcs

€22.50*

Content: 1 pcs

€24.50*

Content: 1 pcs

€36.50*

Content: 1 pcs

€29.50*

Content: 1 pcs

€32.50*

Content: 1 pcs

€36.50*

Content: 1 pcs

€48.00*

Content: 1 pcs

€27.00*

Content: 1 pcs

Hardness [HRC]
53 - 58
53 - 58
53 - 58
53 - 58
53 - 58
53 - 58
53 - 58
53 - 58
53 - 58
Jaw width [mm]
12
15
16
22
15
16
18,5
22
12
Total height [mm]
33
38,5
45
65
38,5
45
53
65
33
Total length [mm]
32
43,5
52
85
43,5
52
69
85
32
Material
40Cr steel
40Cr steel
40Cr steel
20CrMnTi steel
40Cr steel
40Cr steel
20CrMnTi steel
20CrMnTi steel
40Cr steel

1 of 1 reviews

100%

0%

0%

0%

0%

Leave a review!

Share your experiences with other customers.

Excellent

Very good

Good

Acceptable

Unsatisfactory

Fields marked with asterisks (*) are required.

This site is protected by reCAPTCHA and the Privacy Policy and Terms of Use apply.

23 September 2022 13:42

Qualität sehr gut,schnelle Lieferung!

Qualität sehr gut,schnelle Lieferung!

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Paulitschek Maschinen- und Warenvertriebsgesellschaft mbH
Zeppelinstraße 3
89231 Neu-Ulm, Deutschland
+49 731 23232
support@paulimot.de
We respect your privacy
This website uses cookies to provide you with the best possible functionality... More information.
- Imprint