Solid carbide finishing cutter Ø 6.0 mm 35° with AlTiN coating, 4-edged
€11.00*
% €15.50* (29.03% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
Shank cutters are used for cutting out pockets, creating grooves or contours, as well as for milling surfaces or edges. With a finishing cutter, excellent dimensional accuracy and a smooth surface can be achieved at high rotational speeds combined with a low feed rate.
Technical data
| Angle flute [°]: | 35 |
|---|---|
| Cutting edge length [mm]: | 24 |
| Number of cutting edges: | 4 |
| Shank length [mm]: | 51 |
| Surface coating: | AlTiN |
| Tool material: | Carbide |
| Total length [mm]: | 75 |
| Ø milling cutter [mm]: | 6,0 |
| Ø shaft [mm]: | 6 |
Carbide cutters (tungsten carbide-cobalt)
Very high heat and oxidation resistance thanks to AlTiN coating
Ground through the centre for direct plunge cutting into the workpiece
Higher cutting speeds are possible compared to cutters with a TiN coating
Extended tool life
Description of the
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
Scope of delivery
- VHM finishing milling cutter Ø 6.0 mm, 35°, with AlTiN coating, 4-flute
More about the brand and products from
Further information on our professional line
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):
Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
€11.00*
Content: 1 pcs
€5.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€18.00*
Content: 1 pcs
€24.00*
Content: 1 pcs
€31.00*
Content: 1 pcs
7 January 2025 12:53
Edelstahl ist das Maß der Dinge bei Standzeit.
Edelstahl ist ein toller Werkstoff, jedoch auch anspruchsvoll bei der Bearbeitung. Der Fräser hat ein gute Standzeit ist meine Erfahrung. Deshalb immer gerne wieder, sehr empfehlenswert.
20 August 2024 15:58
Hochwertiger Fräser mit guten Schneideigenschaften
Hochwertiger Fräser mit guten Schneideigenschaften
3 April 2022 17:04
VHM Fräser
Super Fräser
13 January 2022 00:00
CNC-Fräsen
Gute schrub und schlicht Eigenschaften
13 January 2022 00:00
CNC-Fräsen
Gute schrub und schlicht Eigenschaften
17 October 2021 00:00
Super Fräser
sehr gutes Werkzeug
27 September 2021 00:00
Fingerfräser
ausgesprochen scharf, erzeugt saubere Flächen
27 June 2021 00:00
Wie gewohnt gute Qualität
Unkomplizierte bestellung und Lieferung.
5 April 2021 00:00
Fingerfräser
Wie immer 1a Ware, schnell erhalten und erfolgreich im Einsatz.
24 February 2021 00:00
Ok