Solid carbide finishing cutter Ø 6.0 mm 45° for aluminium, 3-flute, polished
€13.00*
% €18.00* (27.78% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
Shank cutters are used for machining pockets, creating grooves or contours, as well as for finishing surfaces or edges. With a finishing cutter, excellent dimensional accuracy and a smooth surface finish can be achieved at high rotational speeds combined with a low feed rate.
Technical data
| Angle flute [°]: | 45 |
|---|---|
| Cutting edge length [mm]: | 24 |
| Number of cutting edges: | 3 |
| Shank length [mm]: | 31 |
| Tool material: | Carbide |
| Total length [mm]: | 75 |
| Ø milling cutter [mm]: | 6,0 |
| Ø shaft [mm]: | 6 |
Carbide cutters (tungsten carbide-cobalt)
Extremely sharp and polished
Ground through the centre for direct plunge cutting into the workpiece
For machining aluminium, plastics, non-ferrous metals and Plexiglas
Cutting geometry specifically designed for machining aluminium
Description of the
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
Scope of delivery
- 1 x solid carbide finishing cutter, Ø 6.0 mm, 45°, for aluminium, 3-fluted, polished
More about the brand and products from
Further information on our professional line
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
€13.00*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€8.00*
Contents: 1 pcs
€19.50*
Contents: 1 pcs
€26.50*
Contents: 1 pcs
€34.50*
Contents: 1 pcs
28 February 2025 10:43
Perfekt wie immer
Perfekt wie immer
20 August 2024 15:57
Saubere Schnitte in Aluminium.
Saubere Schnitte in Aluminium.
25 July 2024 16:37
ein preiswertes Werkzeug für Buntmetall
ein preiswertes Werkzeug für Buntmetall
5 February 2022 00:00
Feedback
Good communication, fast delivery. Quality product. Highly recommended.
24 December 2021 00:00
Good
Ok
1 July 2021 00:00
scharf und gute Qualität
scharf und gute Qualität
4 March 2021 00:00
sehr gute Qualität
bestens zufrieden
20 October 2020 00:00
Qualität
Sieht gut aus, noch nicht verwendet
19 May 2020 00:00
Top Qualität!
Top Qualität für diesen Preis!!!
20 January 2020 00:00
Echt Super
Bis jetzt jeder Artikel wie beschrieben habe bis jetzt noch keine bessere Qualität bekommen. Bin sehr zufrieden :) :) :)