Solid carbide finishing cutter Ø 8.0 mm 45° for aluminium, 3-edged, polished
€25.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
End mills are used for carving out pockets, producing grooves or contours, as well as for milling over surfaces or edges. With a finishing cutter, very good dimensional accuracy and a smooth surface can be achieved at high speeds and low feed rates.
Technical data
| Angle flute [°]: | 45 |
|---|---|
| Cutting edge length [mm]: | 32 |
| Number of cutting edges: | 3 |
| Shank length [mm]: | 33 |
| Tool material: | Carbide |
| Total length [mm]: | 75 |
| Ø milling cutter [mm]: | 8,0 |
| Ø shaft [mm]: | 8 |
Milling cutter made from carbide (tungsten carbide-cobalt)
Extremely sharp ground and polished
Ground over the centre for direct plunging into the workpiece
For machining aluminium, plastics, non-ferrous metals and Plexiglas
Cutting edge geometry especially for machining aluminium
Description of the
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
Scope of delivery
- 1 x solid carbide finishing cutter Ø 8.0 mm 45° for aluminium, 3-edged, polished
More about the brand and products from
Further information on our professional line
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
The three-edged carbide finishing cutter made of tungsten carbide-cobalt has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The properties of the ground, polished carbide end mills for aluminium:
The very sharply ground and polished cutting edges make these milling cutters particularly suitable for machining aluminium. The special cutting edge geometry counteracts the formation of built-up edges and at the same time ensures an even and clean surface. The flute angle of 45° ensures optimum chip removal when machining aluminium and therefore also contributes to the surface quality. Thanks to the sharp cut, these milling cutters are ideal for machining plastics and wood and can also be used to machine non-ferrous metals without any problems.
€25.00*
Content: 1 pcs
€7.50*
Content: 1 pcs
€7.50*
Content: 1 pcs
€7.50*
Content: 1 pcs
€7.50*
Content: 1 pcs
€11.00*
Content: 1 pcs
€18.00*
Content: 1 pcs
€35.00*
Content: 1 pcs
€45.00*
Content: 1 pcs
22 September 2023 06:22
sehr zufrieden!
sehr zufrieden!
6 May 2021 00:00
VHM-Schlichtfräser
hervorragend gute Qalietät
4 March 2021 00:00
sehr gute Qualität
bestens zufrieden
29 December 2020 00:00
HS
Sehr gute Qualität zu vernünftigen Preis
1 March 2020 00:00
VHM
Gute Qualität
13 January 2020 00:00
Guter für Alu
Hinterlässt gute Oberflächen. Gute Qualität