Stamping number set 36 pieces, character height: 8 mm
Intended use
Please note that the image may differ slightly from the actual contents of the pack.
A number stamp set is used for stamping and engraving letters and numbers onto various materials. These materials include, amongst others, steel, plastic, wood, aluminium, brass and copper. Using a number stamp set, you can, for example, mark nameplates or workpieces with a number or a name and personalise them.
Technical data
| Font height [mm]: | 8 |
|---|---|
| Hardness [HRC]: | 40 - 50 |
| Length of chisel [mm]: | 74 |
| Workpiece material: | Aluminium, Copper, Plastic, Steel, Wood, brass |
36-piece set
Sturdy pins for precise use
Embossing possible on a wide variety of different materials
Character height: 8 mm
Supplied in a handy storage box
Description of the
This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters reach a font height of 8 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.
To achieve an even typeface, proceed as follows:
- Place the desired letter / number on the material to be punched.
- Now hit the punching pin with a hammer to punch the desired letter / number.
- You can remove the material pressed away by the embossing - depending on the material being punched - using emery paper or sandpaper, for example.
- The depth, width and height of the embossing depends on the impact force used.
Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.
Scope of delivery
- 26 x embossing letters (A to Z)
- 9 x number punches (0 to 8)
- 1 x & symbol
More about the brand and products from
This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters reach a font height of 8 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.
To achieve an even typeface, proceed as follows:
- Place the desired letter / number on the material to be punched.
- Now hit the punching pin with a hammer to punch the desired letter / number.
- You can remove the material pressed away by the embossing - depending on the material being punched - using emery paper or sandpaper, for example.
- The depth, width and height of the embossing depends on the impact force used.
Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.
With this numbering set, you can stamp the letters A to Z, the numbers 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The stamped numbers and letters have a height of 3 mm. The respective embossing appears at the end of the square pins as a mirror-inverted relief. The embossing is chamfered at the striking surfaces, so that chipping of the material is prevented.
To achieve a uniform typeface, proceed as follows:
- Position the desired letter / the desired number on the material to be stamped.
- Now strike the embossing pin selectively with a hammer in order to stamp the desired letter / the desired number.
- You can remove the material displaced by the embossing - depending on the stamped material - e.g. with emery paper or sandpaper.
- The depth, width and height of the embossing depends on the impact force used.
Please note that the set does not include the number 9. To stamp the number 9, please use the stamp with the number "6" and rotate it by 180°.
This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters reach a font height of 4 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.
To achieve an even typeface, proceed as follows:
- Place the desired letter / number on the material to be punched.
- Now hit the punching pin with a hammer to punch the desired letter / number.
- You can remove the material pressed away by the embossing - depending on the material being punched - using emery paper or sandpaper, for example.
- The depth, width and height of the embossing depends on the impact force used.
Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.
This punch number set can be used to punch the letters A to Z, the digits 0 to 9 and the & symbol into materials such as steel, copper, aluminium, brass, plastic, wood and many more. The punched numbers and letters reach a font height of 4.5 mm. The respective embossing is mirror-inverted as a relief at the end of the square pins. The embossing has been removed from the striking surfaces to prevent the material from splintering.
To achieve an even typeface, proceed as follows:
- Place the desired letter / number on the material to be punched.
- Now hit the punching pin with a hammer to punch the desired letter / number.
- You can remove the material pressed away by the embossing - depending on the material being punched - using emery paper or sandpaper, for example.
- The depth, width and height of the embossing depends on the impact force used.
Please note that the number 9 is not included in the set. To punch the number 9, please use the punch with the number "6" and rotate it by 180°.
€25.00*
Contents: 1 Piece
€9.00*
Contents: 1 pcs
€13.50*
Contents: 1 pcs
€15.00*
Contents: 1 pcs
4 Reviews
16 March 2022 19:42
Gerne wieder
Super Preis - Leistungsverhältnis
12 July 2020 00:00
Schlagstempel echtguteszeug
Kurz und Satt mit einem 2 Kg Hammer drauf klopfen und zack... eine deutliche tiefe Kennzeichnung wie man es erwartet. echtguteszeug. Gruß Andimann Deutschland
24 February 2020 00:00
Schlagzahlen
sau schnelle Lieferung ?
13 September 2019 00:00
Die Schriftart kann entscheidend sein
Ich habe mich zu allererst für dieses Schlagzahlen/-buchstaben-Set entschieden, da es mir auf die klassische Schriftweise ankam. Speciell 1, 3 u.a. sehen anders aus als die leichter erhältlichen Alternativen. Zudem sind im Set Buchstaben und Zahlen. Wer weiss denn heute schon, ob man morgen neben Buchstaben nicht doch noch Zahlen braucht - oder andersrum. Das Produkt selbst hat eine ordentliche Qualität, der Postbote staunte nicht schlecht aufgrund des Gewichtes zur Paketgröße. Die Buchstaben sind alle rostschützend verpackt und nach einmaliger Anwendung bisher kann ich kein größeres Problem feststellen.