Tailstock for dividing heads, height-adjustable from 75 to 90 mm
Intended use
The tailstock is used during milling to process workpieces "between the centres" or to support or horizontally align workpieces that are slightly further out of the dividing head.
Technical data
| Base dimensions [mm]: | 117 x 84 |
|---|---|
| Centre height [mm]: | 75 - 90 |
| Centre Ø [mm]: | 20 |
| Material lace: | C45E steel |
| Net weight [kg]: | 2,7 |
| Tip hardness [HRC]: | 40 - 45 |
| Total height [mm]: | 90 |
Height adjustable from 75 to 90 mm
The centre can be adjusted by 30 mm
For use when milling longer shafts
Precise centring of the workpiece in a horizontal position
Description of the
With its height-adjustable centre, this tailstock is suitable for dividing heads with a rotary table centre between 75 and 90 mm in the vertical position.
To achieve horizontal alignment of the workpiece, it is clamped between the dividing attachment and the tailstock. The tailstock centre is fixed at the set height by a clamping screw, and the horizontal position of the centre can also be secured by clamping.
Lateral adjustment of the centre point is made possible by a knurled rotary knob. The horizontal travel of the centre is 30 mm.
Scope of delivery
- 1 x tailstock with height-adjustable centre from 75 to 90 mm
More about the brand and products from
