Test mandrel MK3, 245 mm
Intended use
Test mandrels are an important measuring and testing tool when working with machine tools. On milling machines, they can be used to align or check the alignment of the work spindle to the machine table. On lathes, they are used to align the headstock. Thanks to their high manufacturing accuracy, test mandrels are also suitable for measuring the concentricity of the working spindle of machine tools.
As test mandrels are sensitive measuring equipment, care should be taken to ensure that they are handled and stored carefully.
Technical data
| Length of cylindrical measuring surface [mm]: | 245 |
|---|---|
| Max. Concentricity deviation [mm]: | 0,005 |
| Measuring cylinder diameter [mm]: | 23 |
| Morse taper: | MK3 |
| Surface: | Hardened, ground |
| Surface: | Hardened, ground |
| Total height [mm]: | 335 |
| Total length [mm]: | 335 |
| Material: | 100Cr6 |
For aligning work spindles on machine tools
For the concentricity test of work spindles
Made from 100Cr6 steel
Hardened and ground
Morse taper MK3, total length 335 mm
Description of the
This test mandrel made of 100Cr6 steel with MK3 morse taper is hardened and ground. The cylindrical measuring surface has a length of 245 mm and a diameter of 23 mm. Both ends of the test mandrel have a centring hole. This allows it to be used "between the centres" on lathes to check the alignment of the tailstock.
Scope of delivery
- 1 x test mandrel MK3, 245 mm
More about the brand and products from
