Travelling centre point with 13 inserts MK2
€141.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centre punch (often also called a centre point or rolling centre punch) is one of the most important tools when working with a lathe. It is used to secure the tailstock so that long, thin and heavy workpieces can be machined safely and accurately. With thirteen interchangeable inserts, this set offers you a wide range of possible applications. The outer tapers are particularly suitable for centring hollow bodies such as pipes. The inner tapers included in the set can also be used to centre workpieces without a centre. The eight centring points allow you to carry out delicate work on the workpiece. Centre punches are mainly used at higher speeds.
Technical data
| Body hardness [HRC]: | 40 - 45 |
|---|---|
| Body material: | C45E steel |
| Concentricity (max.) [mm]: | 0,02 |
| Material mounting shank: | 65 Mn steel |
| Morse taper recording: | MK2 |
| Point angle [°]: | 90 |
| Point angle [°]: | 60, 75, 90 |
| Point angle [°]: | 75 |
| Point angle [°]: | 50 |
| Shank hardness [HRC]: | 55 - 60 |
| Speed (max.) [rpm]: | 2.500 |
| Total length [mm]: | 114 |
| Ø tip [mm]: | 5 - 28 |
| Ø tip [mm]: | 5 - 28 |
For securing long, thin and heavy workpieces
Concentricity: 0.02 mm
Supplied with 13 interchangeable inserts for a wide range of applications
Made from tool steel to withstand heavy loads
Other sizes in our range
Description of the
The centre point has two ball bearings and therefore achieves a high concentricity of max. 0.02 mm. It can be used up to a speed of 2500 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We can supply you with further centre punches with 13 inserts in size MK3 and with 7 inserts in sizes MK1 as well as MK2, MK3 and MK4.
Scope of delivery
- 1 x centre point MK2
- 8 x centre point (Ø 5 mm to Ø 28 mm, angle: 50°, 60°, 75°, 90°)
- 3 x inner cone
- 2 x outer cones
- 1 x drive-out wedge
More about the brand and products from
The centre point has two ball bearings and therefore achieves a high concentricity of max. 0.02 mm. It can be used up to a speed of 2500 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We can supply you with further centre punches with 13 inserts in size MK3 and with 7 inserts in sizes MK1 as well as MK2, MK3 and MK4.
Adjustable centre point for taper turning for MK2 + MK3
this eliminates the need to realign the tailstock after cone or taper turning
- total length: 153 mm
- max. adjustment range: +/- 7 mm
- Ø centre: 24 mm
- Centre angle: 60°
The centre point has two ball bearings and therefore achieves a high concentricity of max. 0.02 mm. It can be used up to a speed of 2500 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We can supply you with further centre punches with 13 inserts in size MK2 and with 7 inserts in sizes MK1 as well as MK2, MK3 and MK4.
The centre point has two ball bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2000 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item. The point angle of the centre points is 60°, as is usual for centre points. The angle of the outer cone is 70°.
In contrast to fixed centre points, the tip of rotating centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We can supply you with further centre punches with 7 inserts in sizes MK2 to MK4.
The centre punch tip has double ball bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2000 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item. The point angle of these centre points is 60°, as is usual for centre points. The angle of the outer cone is 70°.
In contrast to fixed centre points, the tip of rotating centre points rotates with the workpiece, which prevents friction and allows higher speeds.
We can supply you with further centre punches with 7 inserts in sizes MK1, MK3 and MK4.
The centre point has two ball bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2000 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item. The point angle of these centre points is 60°. The angle of the outer cone is 70°.
In contrast to fixed centre points, the tip of rotating centre points rotates with the workpiece, which prevents friction and allows higher speeds.
We can supply you with further centre punches with 7 inserts in sizes MK1, MK2 and MK4.
The centre punch tip has double ball bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2000 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item. The point angle of these centre points is 60°. The angle of the outer cone is 70°.
In contrast to fixed centre points, the tip of rotating centre points rotates with the workpiece, which prevents friction and allows higher speeds.
We can supply you with further centre punches with 7 inserts in sizes MK1, MK2 and MK3.
€141.00*
Content: 1 pcs
€56.50*
Content: 1 Piece
€145.00*
Content: 1 pcs
€68.50*
Content: 1 Piece
€83.50*
Content: 1 Piece
€80.00*
Content: 1 Piece
€106.00*
Content: 1 Piece
31 July 2021 00:00
solide Qualität von Paulimot
Erfüllt die vorgesehenen Aufgaben in vollem Umfang!
22 February 2021 00:00
1A Paulimot-Qualität
Genau das Richtige für meine Anforderungen. Hohe Rundlaufgenauigkeit und super Preis. Danke gerne wieder.
1 February 2021 00:00
Sehr zu empfehlen
Ich bin sehr zufrieden damit. 1 A Paulimot Qualität. Kann ich nur empfehlen. Super Preis und schnelle Lieferung herzlichen Dank, und liebe Grüße.
16 November 2020 00:00
TOP
Alles so wie es sein soll, danke !!!
14 January 2019 00:00
TOP *****
Schnelle Lieferung - bin sehr zufrieden mit Preis / Leistungsverhältnis- sehr gute Qualität! Gerne wieder! :)
22 September 2018 00:00
Sehr gut
Das Set beinhaltet alles, was ich so an Spitzen benötige. Wie für mich gemacht.
5 April 2018 00:00
Genau das was mann für kleine Drehteile braucht
25 March 2018 00:00
Schnelle Lieferung - bin sehr zufrieden mit Preis / Leistungsverhältnis- sehr gute Qualität
Schnelle Lieferung - bin sehr zufrieden mit Preis / Leistungsverhältnis- sehr gute Qualität
24 February 2018 00:00
ok
30 October 2017 00:00
einwandfreies Produkt