Turning tool with insert 10 x 13 mm SSSCR1013H09
€17.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Turning tools with replaceable inserts are characterised by the fact that worn cutting edges can be replaced quickly and easily. The tedious and time-consuming regrinding of the cutting edge is no longer necessary. Another advantage of turning tools with reversible or replaceable inserts is that the most suitable insert can be mounted on the holder depending on the material to be machined. For example, there are special inserts for machining aluminium or non-ferrous metals. Both the holders and the inserts are standardised and can be identified by the respective standard designation.
Technical data
| Area of application: | Chamfering, Facing |
|---|---|
| Cross-section of clamping shank [mm]: | 10 x 13 |
| Cutting plate: | SCMT09T304 |
| Execution: | right |
| Standard designation: | SSSCR1013H09 |
| Surface: | burnished |
| Total length [mm]: | 101 |
Right-hand turning tool
Cutting inserts available for special applications
Replacement inserts available individually or in a set of 10
Incl. Torx spanner for quickly changing the insert
Description of the
This turning tool with the standard designation SSSCR1013H09 has a shank of 10 x 13 mm and an overall length of 101 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Scope of delivery
- 1 x Turning tool SSSCR1013H09
- 1 x Torx spanner T15
More about the brand and products from
This turning tool with the standard designation SSSCR1013H09 has a shank of 10 x 13 mm and an overall length of 101 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SSSCR1215H09 has a shank of 12 x 15 mm and an overall length of 101 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SSSCR1415H09 has a shank of 14 x 15 mm and an overall length of 100 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SSSCR1616-09 has a shank of 16 x 16 mm and an overall length of 115 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SSSCR2020K09 has a shank measuring 20 x 20 mm and an overall length of 125 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SSSCR0610D06 has a shank of 6 x 10 mm and an overall length of 60 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also reorder the standard inserts from us individually or in sets of 10. Simply click on the "Accessories" tab above to see all the inserts suitable for this turning tool.
This turning tool with the standard designation SSSCR0810D06 has a shank of 8 x 10 mm and an overall length of 61 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
€17.00*
Content: 1 pcs
€17.50*
Content: 1 pcs
€19.00*
Content: 1 pcs
€18.50*
Content: 1 pcs
€19.00*
Content: 1 Piece
€16.50*
Content: 1 pcs
€16.50*
Content: 1 pcs
11 February 2023 14:09
Drehstahl
Habe schon anders Wendeplattenhalter von Paulimot gekauft und auch dieser entspricht wieder meinen Anforderungen nach einer guten Qualität zu einem guten Preis !
7 December 2022 09:02
Alles gut
Qualität, Verpackung u. Versand alles OK
17 October 2022 10:46
Qualität
Sehr schnelle Lieferung und gute Qualität des Drehmeißels
27 September 2022 13:32
Für meine Zwecke im Hobby-Bereich unschlagbar
Für meine Zwecke im Hobby-Bereich unschlagbar
19 April 2021 00:00
Alles Bestens
Sauber verarbeitet und pass wie beschrieben.
5 August 2020 00:00
Artikel wie beschrieben
Preis / Leistungsverhältnis in Ordnung
2 July 2020 00:00
Sehr gut zum Plandrehen und Anfasen
Mit diesem Drehmeißel kann man aufgrund der Bauform sehr einfach Plandrehen und Anfasen. Es geht einfacher und schneller als mit den Standard-HSS-Drehmeißeln. Für die Benutzung mit dem Standard-Stahlhalter der PM190-V Drehmaschine muss man noch eine 2 mm Platte unterlegen. Für Anfänger wäre es toll so eine Unterlegplatte als Zubehör anzubieten.
5 November 2019 00:00
sehr zufrieden
gerne wieder!
20 July 2019 00:00
Was von einem Drehmeißel erwartet wird
Alles passt nichts wackelt also volle Zufriedenheit
25 May 2019 00:00
Der Dremeissel entspricht der erwarteten Qualität; Preis/Leistung top
Der Torx-Schlüssel zerbrach beim erstmaligen Gebrauch; ist nicht tragisch; Torxschlüssel gibts überall; Jedoch bitte auch hier entweder eine entsprechende Qualität oder heine Beilage.