Turning tool with insert 12 x 12 mm SRGCR1212F10
Intended use
Turning tools with replaceable inserts are characterised by the fact that worn cutting edges can be replaced quickly and easily. The tedious and time-consuming regrinding of the cutting edge is no longer necessary. Another advantage of turning tools with reversible or replaceable inserts is that the most suitable insert can be mounted on the holder depending on the material to be machined. For example, there are special inserts for machining aluminium or non-ferrous metals. Both the holders and the inserts are standardised and can be identified by the respective standard designation.
Technical data
| Area of application: | Longitudinal turning, Mould turning, Surface finish |
|---|---|
| Cross-section of clamping shank [mm]: | 12 x 12 |
| Cutting plate: | RCMT10T300 |
| Execution: | right |
| Standard designation: | SRGCR1212F10 |
| Surface: | burnished |
| Total length [mm]: | 80 |
Right-hand turning tool
Cutting inserts available for special applications
Replacement inserts available individually or in a set of 10
Incl. Torx spanner for quickly changing the insert
Description of the
This turning tool with the standard designation SRGCR1212F10 has a 12 x 12 mm shank and an overall length of 80 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Scope of delivery
- 1 x SRGCR1212F10 turning tool
- 1 x Torx spanner T15
More about the brand and products from
This turning tool with the standard designation SRGCR1212F10 has a 12 x 12 mm shank and an overall length of 80 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SRGCR1010E10 has a 10 x 10 mm shank and an overall length of 70 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SRGCR1414H10 has a 14 x 14 mm shank and an overall length of 100 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SRGCR1616H10 has a 16 x 16 mm shank and an overall length of 100 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SRGCR2020K10 has a shank measuring 20 x 20 mm and an overall length of 125 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SRGCR0606D06 has a 6 x 6 mm shank and an overall length of 61 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SRGCR0808D06 has a shank of 8 x 8 mm and an overall length of 61 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
€17.00*
Content: 1 pcs
€17.00*
Content: 1 pcs
€18.00*
Content: 1 pcs
€17.50*
Content: 1 Piece
€19.50*
Content: 1 Piece
€16.50*
Content: 1 pcs
€16.50*
Content: 1 pcs
19 January 2023 09:02
Alles super, wie man es bei Paulimot
Alles super, wie man es bei Paulimot gewohnt ist. Immer wieder gerne.
1 December 2021 00:00
Drehmeißel mit Schneidplatte
Konnte die Drehmeißel nur kurz testen, ich denke gute Qualität, bin voll zufrieden. Werde mir noch weitere Schneidplatten bestellen. Die Lieferung erfolgte sehr schnell, voll zufrieden.
11 July 2021 00:00
alles prima
alles prima
11 February 2021 00:00
zufrieden
keine Kommentare
11 February 2021 00:00
zufrieden
keine Kommentare
17 November 2020 00:00
Top
Einwandfrei
15 October 2020 00:00
Top
Top Ware, wie fast immer
16 June 2019 00:00
Super Drehmeisel
Super Qualität, sehr schnelle Lieferung
10 March 2019 00:00
Top Preis Leistung
Sehr zufrieden schnell geliefert Kostenlose Tasche ist unnötig landete direkt im Müll
27 March 2018 00:00
Wendeschneidplatten/rund
Sehr gute Ware, geeignet nur für nicht zu harten Stahl