Turning tool with insert 8 x 10 mm SWUCR0610H05
€16.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Turning tools with replaceable inserts are characterised by the fact that worn cutting edges can be replaced quickly and easily. The tedious and time-consuming regrinding of the cutting edge is no longer necessary. Another advantage of turning tools with reversible or replaceable inserts is that the most suitable insert can be mounted on the holder depending on the material to be machined. For example, there are special inserts for machining aluminium or non-ferrous metals. Both the holders and the inserts are standardised and can be identified by the respective standard designation.
Technical data
| Areas of application: | Internal boring |
|---|---|
| Bore Ø min. [mm]: | 13 |
| Cross-section of clamping shank [mm]: | 8 x 10 |
| Cutting plate: | WCMT050308 |
| Execution: | right |
| Standard designation: | SWUCR0610H05 |
| Surface: | burnished |
| Total length [mm]: | 100 |
Right-hand turning tool
Cutting inserts available for special applications
Replacement inserts available individually or in a set of 10
Incl. Torx spanner for quickly changing the insert
Description of the
This turning tool with the standard designation SWUCR0610H05 has a shank of 8 x 10 mm and an overall length of 100 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Scope of delivery
- 1 x SWUCR0610H05 turning tool
- 1 x Torx spanner T10
More about the brand and products from
This turning tool with the standard designation SWUCR0610H05 has a shank of 8 x 10 mm and an overall length of 100 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SWUCR0810J06 has a shank measuring 11 x 10 mm and an overall length of 110 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SWUCR1012J06 has a 13 x 12 mm shank and an overall length of 110 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also reorder the standard inserts from us individually or in sets of 10. Simply click on the "Accessories" tab above to see all the inserts suitable for this turning tool.
This turning tool with the standard designation SWUCR1214J06 has a shank measuring 15 x 14 mm and an overall length of 101 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SWUCR1216K06 has a 15 x 16 mm shank and an overall length of 125 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SWUCR1620M06 has a shank measuring 18 x 20 mm and an overall length of 150 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SCUCR0410F06 has a shank of 6 x 10 mm and an overall length of 80 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
€16.50*
Content: 1 Piece
€17.00*
Content: 1 Piece
€17.50*
Content: 1 Piece
€18.00*
Content: 1 pcs
€18.00*
Content: 1 Piece
€19.50*
Content: 1 Piece
€16.00*
Content: 1 Piece
29 November 2022 17:53
Lieferung okay, nichts zu bemängeln. Gute Auswahl
Lieferung okay, nichts zu bemängeln. Gute Auswahl an Werkzeugen für kleine Werkzeugmaschinen.
18 November 2022 06:34
Die Qualität ist für den Hobbyisten völlig
Die Qualität ist für den Hobbyisten völlig ausreichend. Das Preis-Leistungs-Verhältnis ist sehr gut.
23 May 2022 16:18
Perfekt
Perfekt
30 December 2021 00:00
… wie immer, nur beste Qualität …
Alle bis jetzt, bis hin zur V190, gekauften Werkzeuge waren von hervorragender Qualität !!! Ich bin nur ein HobbyBastler, doch werde weiterhin bei Paulimot einkaufen !!!
7 May 2021 00:00
1:00 AM
Sehr gute Qualität
21 December 2019 00:00
Guter Drehmeißel
Bin sehr zufieden, schnelle unkomplizierte Lieferung. Preis Leistung sehr gut. Das war nicht meine Letzte Bestellung.
13 October 2019 00:00
Drehmeißel auch für Innenausdrehung
Der Drehmeisel ist sauber verarbeitet . Die Wendeplattenaufnahme ist etwas nach links geneigt . Somit wird der Freiwinkel an der Wendeschneidplatte größer . Das ist wichtig beim Innenausdrehen .
8 August 2019 00:00
Guter Drehmeißel zum guten Preis.
Diesen Drehmeißel habe ich zum Ausdrehen von Rotgusslager gekauft. Der Meißel ist kompakt, stabil und macht einen sauberen Span.
6 November 2017 00:00
Drehzahl mit Wendeplatten
Bin mit dem Produkt sehr zufrieden, würde mir jedoch bei der Produktbezeichnung/Beschreibung wünschen für welchen Stahl die Wendeplatten geeignet sind. Ohne in Tabellen nachschlagen zu müssen und die Bezeichnung einzu ordnen.