Valve seat milling cutter set 45° and 90°, Ø 30 – 60 mm, 27-piece
Intended use
Valve seat milling cutters are used in engine repair in the automotive sector.
Technical data
| Guide arbour length [mm]: | 90 |
|---|---|
| Material milling heads: | C45E quenched and tempered steel, hardened |
| Ø guide mandrels [mm]: | 6 - 12 |
| Ø milling heads [mm]: | 30 - 60 |
For milling valve seats
Five milling heads diameter 30 to 60 mm
Five guide arbours diameter 6 to 12 mm
Milling heads made from C45E heat-treated steel, hardened
In a clearly organised storage box
Description of the
This valve seat milling cutter set consists of 13 double milling heads with 45° and 90° cutting edges in diameters of 30 to 60 mm. The milling heads are made of C45E heat-treated steel and hardened. The 13 steel guide arbours are ground to diameters of 6 to 12 mm and can be screwed into the T-handle using an M10 thread.
The cutters in this set are not suitable for machining hardened valve seats.
Scope of delivery
- 1 x milling head Ø 30 mm
- 1 x milling head Ø 32.5 mm
- 1 x milling head Ø 35 mm
- 1 x milling head Ø 37.5 mm
- 1 x milling head Ø 40 mm
- 1 x milling head Ø 42.5 mm
- 1 x milling head Ø 45 mm
- 1 x milling head Ø 47.5 mm
- 1 x milling head Ø 50 mm
- 1 x milling head Ø 52.5 mm
- 1 x milling head Ø 55 mm
- 1 x milling head Ø 57.5 mm
- 1 x milling head Ø 60 mm
- 1 x guide arbour Ø 6 mm
- 1 x guide arbour Ø 6.5 mm
- 1 x guide arbour Ø 7 mm
- 1 x guide arbour Ø 7.5 mm
- 1 x guide arbour Ø 8 mm
- 1 x guide mandrel Ø 8.5 mm
- 1 x guide mandrel Ø 9 mm
- 1 x guide mandrel Ø 9.5 mm
- 1 x guide mandrel Ø 10 mm
- 1 x guide mandrel Ø 10.5 mm
- 1 x guide mandrel Ø 11 mm
- 1 x guide mandrel Ø 11.5 mm
- 1 x guide mandrel Ø 12 mm
- 1 x T-handle (holder for guide mandrels)
More about the brand and products from
