Vice for dividing heads Ø 80 mm, jaw width 64 mm
€29.00*
% €30.50* (4.92% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A vice is used to clamp workpieces properly so that drilling and milling work can be carried out safely on machine tools (e.g. drilling machines or drilling/milling machines).
Technical data
| Base area [mm]: | Ø 82 |
|---|---|
| Jaw height [mm]: | 20 |
| Jaw width [mm]: | 64 |
| Span (max.) [mm]: | 28 |
| Surface: | ground |
| Total height [mm]: | 32 |
| Material: | Steel |
64 mm jaw width, 28 mm maximum clamping width
Suitable for fine drilling and milling work
Movable jaw with vertical and horizontal prism for clamping cylindrical workpieces
For mounting on dividing heads
Including four M5 sliding blocks and four M5 fastening screws
Description of the
This small vice, ground on all sides, is suitable for fine drilling and milling work. The arrangement of the four holes for the fixing screws included in the scope of delivery allows it to be mounted on dividing heads with three or four T-slots. The movable jaw, which is equipped with one horizontal and one vertical prism, can be moved and clamped via the spindle. The handle is knurled for a good grip. There is a cross hole at the end of the handle. A shaft with a corresponding diameter is installed in this cross hole, which is used as a lever to increase the clamping force.
Scope of delivery
- 1 x vice for dividing heads Ø 80 mm, jaw width 64 mm
- 4 x T-slot nut M5
- 4 x hexagon socket screw M5 x 16
More about the brand and products from
This small vice, ground on all sides, is suitable for fine drilling and milling work. The arrangement of the four holes for the fixing screws included in the scope of delivery allows it to be mounted on dividing heads with three or four T-slots. The movable jaw, which is equipped with one horizontal and one vertical prism, can be moved and clamped via the spindle. The handle is knurled for a good grip. There is a cross hole at the end of the handle. A shaft with a corresponding diameter is installed in this cross hole, which is used as a lever to increase the clamping force.
This small vice, ground on all sides, is suitable for fine drilling and milling work. The arrangement of the four holes for the fixing screws included in the scope of delivery allows it to be mounted on dividing heads with three or four T-slots. The movable jaw, which is equipped with one horizontal and one vertical prism, can be moved and clamped via the spindle. The handle is knurled for a good grip. There is a cross hole at the end of the handle. A shaft with a corresponding diameter is installed in this cross hole, which is used as a lever to increase the clamping force.
€29.00*
Content: 1 pcs
€29.50*
Content: 1 pcs
5 December 2024 10:54
Klein aber fein
Der kleine runde Schraubstock ist einwandfrei hergestellt, die Verarbeitung ist ordentlich, maßhaltig und winklig. Damit lassen sich kleinere Werkstück genau spannen. Diesen Schraubstock würde ich bei Bedarf jederzeit wieder bedenkenlos kaufen. Ich verwende den Schraubstock auf meiner Schleifmaschine und seine runde Form ermöglicht das Schwenken.
17 April 2024 06:18
Teileap.
Gut für kleine Teile Modelbau und für Oltimerteile
1 November 2022 09:18
Vielen Dank für die schnelle Lieferung des
Vielen Dank für die schnelle Lieferung des Qualitätsprodukts ist alles sehr gut.
30 April 2022 06:03
Nice vise
Very good little vise with a nice fit on the rotary table, feels sturdy