Vice protective jaws 80 mm, type F (fibre)
€12.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Protective vice jaws are used to clamp workpieces securely in a vice without damaging them.
Technical data
| Base body material: | Aluminium |
|---|---|
| Height of jaws [mm]: | 28 |
| Type: | F, fever |
| Width of jaws [mm]: | 80 |
Solid aluminium base body
Width of the protective jaws 80 mm
Height of the protective jaws 28 mm
Strong magnetic adhesion
Fibre coating for clamping polished or heated workpieces
Description of the
Made from aluminium, the vice protective jaws are 80 mm wide and the jaw height is 28 mm. The fibre coating allows workpieces with a polished or finely machined surface to be clamped in a vice without damaging them. Due to the good heat resistance of fibre, even heated workpieces can be clamped securely.
There are two magnets on the inside of each of the protective jaws. This prevents the jaws from falling off when clamping or releasing the workpiece.
These protective jaws are used to protect a workpiece that is clamped in a vice. To fulfil this function, these protective jaws must be made of a very soft material (aluminium). Due to the soft material, this product may show tiny scratches even when new, without this constituting a defect.
Scope of delivery
- 2 x vice protection jaws type F, fibre, 80mm
More about the brand and products from
Made from aluminium, the vice protective jaws are 80 mm wide and the jaw height is 28 mm. The fibre coating allows workpieces with a polished or finely machined surface to be clamped in a vice without damaging them. Due to the good heat resistance of fibre, even heated workpieces can be clamped securely.
There are two magnets on the inside of each of the protective jaws. This prevents the jaws from falling off when clamping or releasing the workpiece.
These protective jaws are used to protect a workpiece that is clamped in a vice. To fulfil this function, these protective jaws must be made of a very soft material (aluminium). Due to the soft material, this product may show tiny scratches even when new, without this constituting a defect.
Made from aluminium, the vice protection jaws are 125 mm wide and the jaw height is 28 mm. The fibre coating allows workpieces with a polished or finely machined surface to be clamped in a vice without damaging them. Due to the good heat resistance of fibre, even heated workpieces can be clamped securely.
There are two magnets on the inside of each of the protective jaws. This prevents the jaws from falling off when clamping or releasing the workpiece.
These protective jaws are used to protect a workpiece that is clamped in a vice. To fulfil this function, these protective jaws must be made of a very soft material (aluminium). Due to the soft material, this product may show tiny scratches even when new, without this constituting a defect.
The protective jaws made of aluminium are 100 mm wide and the jaw height is 28 mm. The fibre coating allows workpieces with a polished or finely machined surface to be clamped in a vice without damaging them. Due to the good heat resistance of fibre, even heated workpieces can be clamped securely.
There are two magnets on the inside of each of the protective jaws. This prevents the jaws from falling off when clamping or releasing the workpiece.
These protective jaws are used to protect a workpiece that is clamped in a vice. To fulfil this function, these protective jaws must be made of a very soft material (aluminium). Due to the soft material, this product may show tiny scratches even when new, without this constituting a defect.
€12.50*
Content: 1 pcs
€16.00*
Content: 1 Piece
€13.00*
Content: 1 pcs
11 March 2023 16:53
Gut aber nicht perfekt
Die Verarbeitung ist gut und passt auf den 80 mm Schraubstock, allerdings die Magnete hätten etwas stärker sein können.