paulimot Steel holder with prism suitable for "System Multifix", size Aa
€25.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A quick-change steel holder set is a precise and efficient clamping system for lathes to enable the quick change of turning tools, boring bars or other tools. The steel holder with the clamped tool is correctly aligned to the centre of the machine spindle just once. This positioning is fixed using a lock nut and is therefore set to the correct height each time the steel holder is reinserted into the base body. The base body of the system is firmly mounted on the top slide of the lathe and forms the basis of the system. The steel holder is the interchangeable component in which the turning tools are clamped. The system's fine-toothed ratchet system enables repeatable alignment of the tool without the need for readjustment.
Technical data
| Hardness of steel holder [HRC]: | 40 |
|---|---|
| Length [mm]: | 50 |
| Suitable for dimension "s" [mm]: | 10 - 30 |
| Suitable for top slide width [mm]: | 45 - 60 |
| Surface: | ground |
| System size: | Aa |
| Tool material Steel holder: | C45E steel |
| Turning steel holder [mm]: | 4 - 12 |
Steel holder suitable for "System Multifix", size Aa
For clamping turning tools with a round shank
Suitable for turning steel heights from 4 to 12 mm
Description of the
This steel holder is suitable for the "System Multifix" size Aa. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 12 mm can be clamped.
Scope of delivery
- 1 x steel holder AaH 1250
More about the brand and products from
This steel holder is suitable for the "System Multifix" size Aa. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 12 mm can be clamped.
This steel holder is suitable for the "System Multifix" size Ab. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 16 mm can be clamped.
This steel holder is suitable for the "System Multifix" size A. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 20 mm can be clamped.
This steel holder is suitable for the "System Multifix" size E. The milled prism in the contact surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 30 mm can be clamped.
This steel holder is suitable for the "System Multifix" size B. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 32 mm can be clamped.
Tip:
Are you unsure which quick-change steel holder size is right for you?
Then our guide is just right for you! In it, we show you how you can easily determine the right size.
Our guide to quick-change steel holder sizes: Determining the right quick-change steel holder size - our tips.
Alternatively, you can also use our quick-change steel holder advisor: Quick-release steel holder advisor
This steel holder is suitable for the "System Multifix" size C. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 40 mm can be clamped.
€25.00*
Content: 1 pcs
€44.00*
Content: 1 Piece
€46.00*
Content: 1 pcs
€68.00*
Content: 1 Piece
€78.00*
Content: 1 pcs
€105.00*
Content: 1 Piece
8 April 2025 19:18
Es spart viel Zeit, wenn man genug
Es spart viel Zeit, wenn man genug davon hat. Zu dem Einen mit Prisma habe ich 4 ohne Prisma.
19 November 2024 09:08
Passt, alles gut.
Passt, alles gut.
14 May 2024 06:28
Absolut top und sehr schnelle Lieferung!
Absolut top und sehr schnelle Lieferung!
25 April 2024 16:59
Qualität gut, Preis / Leistung gut
Qualität gut, Preis / Leistung gut
29 March 2024 08:38
Schneller Stahlwechsel zum fairen Preis
Erleichtert die Arbeit außerordentlich. Preis o.k.
5 March 2024 09:11
alles bestens
alles bestens
21 September 2023 06:24
problemlos, funktioniert einwandfrei.
problemlos, funktioniert einwandfrei.
7 July 2023 06:50
multifix AA
Super Qualität für den Preis
14 March 2023 22:18
gut immer wieder
sehr gute qualität
15 February 2023 09:26
Die Multifixhalter sparen bei der Einrichtung der
Die Multifixhalter sparen bei der Einrichtung der Maschine viel Zeit! Das macht gerade im Hobbybereich, wo meist Einzelteile gefertigt werden, sehr viel Sinn! Gute Teile zum fairen Preis.
Similar articles
