paulimot Steel holder suitable for "System Multifix", size Aa
€25.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A quick-change steel holder set is a precise and efficient clamping system for lathes to enable the quick change of turning steels, boring bars or other tools. The steel holder with the clamped tool is correctly aligned to the centre of the machine spindle just once. This positioning is fixed using a lock nut and is therefore set to the correct height each time the steel holder is reinserted into the base body. The base body of the system is firmly mounted on the top slide of the lathe and forms the basis of the system. The steel holder is the interchangeable component in which the turning tools are clamped. The system's fine-toothed ratchet system enables repeatable alignment of the tool without the need for readjustment.
Technical data
| Hardness of steel holder [HRC]: | 40 |
|---|---|
| Length [mm]: | 50 |
| Suitable for dimension "s" [mm]: | 10 - 30 |
| Suitable for top slide width [mm]: | 45 - 60 |
| Surface: | ground |
| System size: | Aa |
| Tool material Steel holder: | C45E steel |
| Turning steel holder [mm]: | 4 - 12 |
Steel holder suitable for "System Multifix", size Aa
For clamping turning tools with a rectangular shank
Suitable for turning steel heights from 4 to 12 mm
Description of the
This steel holder is suitable for the "System Multifix" size Aa. The flat contact surface for turning tools makes it suitable for clamping tools with a rectangular shank. Tools with a shank height of up to 12 mm can be clamped.
Scope of delivery
- 1 x steel holder AaD 1250
More about the brand and products from
This steel holder is suitable for the "System Multifix" size Aa. The flat contact surface for turning tools makes it suitable for clamping tools with a rectangular shank. Tools with a shank height of up to 12 mm can be clamped.
This steel holder is suitable for the "Multifix" system, size Ab. The flat contact surface for turning tools makes it suitable for clamping tools with a rectangular shank. Tools with a shank height of up to 16 mm can be clamped.
This steel holder is suitable for the "System Multifix" size A. The flat contact surface for turning tools makes it suitable for clamping tools with a rectangular shank. Tools with a shank height of up to 20 mm can be clamped.
This steel holder is suitable for the "System Multifix" size E. The flat contact surface for turning tools makes it suitable for clamping tools with a rectangular shank. Tools with a shank height of up to 20 mm can be clamped.
This steel holder is suitable for the "System Multifix" size B. The flat support surface for turning tools makes it suitable for clamping tools with a rectangular shank. Tools with a shank height of up to 32 mm can be clamped.
This steel holder is suitable for the "System Multifix" size C. The flat contact surface for turning tools makes it suitable for clamping tools with a rectangular shank. Tools with a shank height of up to 32 mm can be clamped.
€25.00*
Content: 1 pcs
€44.00*
Content: 1 Piece
€46.00*
Content: 1 pcs
€68.00*
Content: 1 Piece
€78.00*
Content: 1 pcs
€99.00*
Content: 1 Piece
3 reviews
12 March 2025 13:38
Alles bestens, wie gewohnt top Qualität. Gerne
Alles bestens, wie gewohnt top Qualität. Gerne wieder
8 January 2025 08:44
Sehr gute Ware. Gerne wieder.
Sehr gute Ware. Gerne wieder.
6 January 2025 23:05
Timo bringt's !!!
Wie immer gute Qualität und schnelle Abwicklung. Dank der tollen Videos von Timo finde ich auch schnell und zuverlässig das richtige Werkzeug für meinen Einsatz.
25 April 2024 08:58
AAA+
AAA+
11 February 2024 14:01
Alles gut
Perfekt
21 September 2023 06:24
problemlos, funktioniert einwandfrei.
problemlos, funktioniert einwandfrei.
25 March 2023 09:09
alles bestens
alles bestens
21 March 2023 16:15
kleiner Helfer
Qualität wie immer Spitze und Stahlhalter braucht man immer. :-)
15 February 2023 09:26
Die Multifixhalter sparen bei der Einrichtung der
Die Multifixhalter sparen bei der Einrichtung der Maschine viel Zeit! Das macht gerade im Hobbybereich, wo meist Einzelteile gefertigt werden, sehr viel Sinn! Gute Teile zum fairen Preis.
7 February 2023 19:22
Klein aber fein! Das Stahlhalterset Aa ist
Klein aber fein! Das Stahlhalterset Aa ist für feinmechanische Arbeiten sehr gut geeignet.
Similar articles
