paulimot Holder for HSS cut-off knife suitable for "System Multifix", size Aa
€73.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A quick-change steel holder set is a precise and efficient clamping system for lathes to enable the quick change of turning steels, boring bars or other tools. The steel holder with the clamped tool is correctly aligned to the centre of the machine spindle just once. This positioning is fixed using a lock nut and is therefore set to the correct height each time the steel holder is reinserted into the base body. The base body of the system is firmly mounted on the top slide of the lathe and forms the basis of the system. The steel holder is the interchangeable component in which the turning tools are clamped. The system's fine-toothed ratchet system enables repeatable alignment of the tool without the need for readjustment.
Technical data
| Hardness of steel holder [HRC]: | 40 |
|---|---|
| Length [mm]: | 50 |
| Max. Blade height [mm]: | 12 |
| Suitable for dimension "s" [mm]: | 10 - 30 |
| Suitable for top slide width [mm]: | 45 - 60 |
| Surface: | ground |
| System size: | Aa |
| Tool material Steel holder: | C45E steel |
Parting-off blade holder suitable for "System Multifix", size Aa
For clamping HSS cut-off knives
For cut-off blades with the dimensions 2.5 x 12 x 100 mm
Description of the
This holder is suitable for the "System Multifix" size Aa. It is intended for clamping an HSS parting-off cutter with the dimensions 2.5 x 12 x 100 mm.
Scope of delivery
- 1 x holder for HSS cut-off knives
More about the brand and products from
This holder is suitable for the "System Multifix" size Aa. It is intended for clamping an HSS parting-off cutter with the dimensions 2.5 x 12 x 100 mm.
This holder is suitable for the "System Multifix" size Ab. It is intended for clamping an HSS parting-off cutter with the dimensions 2.5 x 12 x 100 mm.
This holder is suitable for the "System Multifix" size A. It is intended for clamping an HSS parting-off cutter with the dimensions 3 x 15 x 120 mm.
This holder is suitable for the "System Multifix" size E. It is intended for clamping an HSS parting-off cutter with the dimensions 3 x 15 x 120 mm.
This holder is suitable for the "System Multifix" size B. It is intended for clamping an HSS parting-off cutter with the dimensions 3 x 19 x 153 mm.
This holder is suitable for the "System Multifix" size C. It is intended for clamping an HSS parting-off cutter with the dimensions 4.8 x 20 mm.
€73.00*
Content: 1 Piece
€83.00*
Content: 1 Piece
€93.00*
Content: 1 Piece
€104.00*
Content: 1 Piece
€124.00*
Content: 1 Piece
€129.00*
Content: 1 Piece
19 November 2024 09:07
Könnte etwas größere Aufnahme haben. Das 13
Könnte etwas größere Aufnahme haben. Das 13 mm Abstech - Messer passt nicht rein.
25 February 2023 12:24
OK
OK
17 January 2023 19:48
Super
Super
11 October 2022 16:02
Sehr gute Qualität zu einem guten Preis,
Sehr gute Qualität zu einem guten Preis, sowie auch die anderen Produkte System Multifix.
28 July 2022 09:48
Alles so einwandfrei, wie es sein sollte.
Alles so einwandfrei, wie es sein sollte. Ich werde wieder bei Ihnen einkaufen!
9 November 2021 00:00
Sehr gut gefertigt.
Davon kann man nie genug haben.
12 March 2021 00:00
Sehr Gut
Ausführung wie angeboten, ich bin sehr zufrieden.
26 February 2021 00:00
Sollte jeder haben!
...erleichtert die Arbeit ungemein
15 February 2021 00:00
Halter
Passt sehr gut. Preis-Leistung sehr gut
23 January 2021 00:00
Sehr gut
Schnelle Lieferung. Gutte Qualität.
Similar articles
