Skip to main content

Drilling/milling machine F207-V with ball screws and German motor

Intended use

The F207-V is a router for use in the high-end hobby and semi-professional sector. Due to its versatile application possibilities, this machine is used in functional modelling, in individual and small series production or in prototype construction. The milling machine is designed for machining steel, cast iron, all non-ferrous metals, aluminium, brass, etc., but can also be used for machining plastics or similar materials that are not hazardous to health or generate dust.

Technical data

Drilling capacity max. [mm]: 20
Frequency [Hz]: 50
Gross weight [kg]: 132
Hole spacing for fastening the machine base [mm]: 245 / 220
Inclination range of drilling / milling head [°]: +/- 90
Machine base dimensions [mm]: 275 x 340
Machine dimensions (LxWxH) [mm]: 950 x 560 x 980
Max. distance between spindle and worktable [mm]: 370
Milling capacity cutter head (max.) [mm]: 63
Milling capacity finger cutter (max.) [mm]: 16
Motor power (P1) [W]: 1.000
Motor power (P2) [W]: 750
Net weight [kg]: 113
Number of T-slots: 3
Packaging dimensions (LxWxH) [mm]: 730 x 710 x 900
Projection [mm]: 200
Quill stroke [mm]: 50
Size of the T-slots [mm]: 12 (M10)
Spindle holder: MK2 / M10
Spindle speed (high range) [rpm].: 650 - 2.250
Spindle speed (low range) [rpm].: 150 - 650
Steps Spindle speed: 2 - variable
T-slot spacing [mm]: 63
Table rotatable [°]: no
Table size [mm]: 700 x 180
Voltage [V]: 230
WEEE reg. no.: EN 95902713
X-axis travel [mm]: 480
Y-axis travel [mm]: 150
Z-axis travel [mm]: 250

Powerful 3-phase asynchronous motor (made in Germany) for VFD operation with an input power of 1,000 watts

Frequency inverter customised to the special motor (made in Austria)

Gearbox gradation for optimum torque in the lower speed range

Table: 700 x 180 mm / Tool holder: MK2 / M10

Equipped with ball screws on the X and Y axes

Description of the

The F207-V drilling/milling machine offers a wide range of applications. The machine is driven by a frequency-controlled 3-phase asynchronous three-phase motor. Thanks to its two-stage gearbox, it has two speed ranges (slow and fast), which can be adjusted using a rotary knob. The reduction ratio ensures a high torque at the work spindle even in the low speed range. The spindle speed is infinitely adjustable from 150 to 2,250 rpm. The machine has clockwise and anti-clockwise rotation. The milling head (Z-axis) is moved by handwheel. The machine also has a fine feed, which can only be used to move the quill in the Z direction. For drilling work, the quill is fed via the star grip on the side. The travel of the quill can be read on the digital drilling depth display. The work spindle has an MK2 tool holder. The dovetail guides on the X, Y and Z axes can be adjusted backlash-free by means of wedge strips. The 700 x 180 mm worktable has three T-slots (12 mm / M10) for clamping workpieces or clamping devices. The work table is adjusted in the X and Y axes using handwheels with vernier. The cross table of the F207-V is equipped with recirculating ball screws for backlash-free and precise movement.

With the recirculating ball screw, also known as a ball screw drive, balls inserted into the spindle nut transmit the force between the spindle and nut. As the spindle rotates, these balls move axially in the grooves between the nut and spindle. The balls are returned through channels in the spindle nut, creating a circuit in which the balls circulate around the spindle.

  • The advantages of a recirculating ball screw:
  • Significantly lower friction (rolling friction) compared to conventional trapezoidal spindles (sliding friction)
  • Less wear, therefore longer service life
  • Significantly higher accuracy and freedom from backlash compared to normal screw drives such as trapezoidal spindles
  • Higher travel speeds possible

Scope of delivery

  • 1 x F207-V drilling/milling machine with ball screws and German motor
  • 1 x Detailed operating instructions
  • 2 x Hand crank with screw for handwheels
  • 1 x Set of hexagon socket spanners
  • 1 x open-end spanner (17/19)
  • 1 x open-end spanner (8/10) for tool change
  • 2 x screwdrivers
  • 2 x hammerhead screw for T-slots M10x60
  • 2 x washer M10
  • 2 x nut M10
  • 1 x oil can

More about the brand and products from 

Product comparison
Article image
A red and silver F207-V drilling and milling machine. The machine has a worktable with T-slots and handwheels. A digital display is also visible.
Front view of a red and silver-coloured F205-V drilling/milling machine. It has a worktable with T-slots, handwheels, a German motor and ball screws.
Front view of the F207-V drilling/milling machine with digital measuring system. Red base, tool table with T-slots and handwheels, digital display.
A red and grey F307-V drilling and milling machine with a worktable and a digital display against a white background.
Front view of the F307-V drilling and milling machine with digital measuring system. Red machine base, cross table with handwheels and drilling head are visible.
A red F400-G drilling/milling machine stands on a white surface. It has a worktable with T-slots and a digital drilling depth display. Several hand cranks and switches can be seen.
Front view of the F400-G drilling/milling machine in red and grey with digital measuring system. Operating elements and tool tray are visible.
Product title
Drilling/milling machine F207-V with ball screws and German motor
Drilling/milling machine F205-V with ball screws and German motor
Drilling/milling machine F207-V with ball screws and measuring system
Drilling/milling machine F307-V with ball screws and German motor
Drilling/milling machine F307-V with ball screws and measuring system
Drilling/milling machine F400-G with oil bath gearbox
Drilling/milling machine F400-G with oil bath gearbox and measuring system
Valuation

Average rating of 4.9 out of 5 stars

Average rating of 4.9 out of 5 stars

Average rating of 4.9 out of 5 stars

Average rating of 4.9 out of 5 stars

Average rating of 4.9 out of 5 stars

Average rating of 4.7 out of 5 stars

Average rating of 4.7 out of 5 stars

Description of the

The F207-V drilling/milling machine offers a wide range of applications. The machine is driven by a frequency-controlled 3-phase asynchronous three-phase motor. Thanks to its two-stage gearbox, it has two speed ranges (slow and fast), which can be adjusted using a rotary knob. The reduction ratio ensures a high torque at the work spindle even in the low speed range. The spindle speed is infinitely adjustable from 150 to 2,250 rpm. The machine has clockwise and anti-clockwise rotation. The milling head (Z-axis) is moved by handwheel. The machine also has a fine feed, which can only be used to move the quill in the Z direction. For drilling work, the quill is fed via the star grip on the side. The travel of the quill can be read on the digital drilling depth display. The work spindle has an MK2 tool holder. The dovetail guides on the X, Y and Z axes can be adjusted backlash-free by means of wedge strips. The 700 x 180 mm worktable has three T-slots (12 mm / M10) for clamping workpieces or clamping devices. The work table is adjusted in the X and Y axes using handwheels with vernier. The cross table of the F207-V is equipped with recirculating ball screws for backlash-free and precise movement.

With the recirculating ball screw, also known as a ball screw drive, balls inserted into the spindle nut transmit the force between the spindle and nut. As the spindle rotates, these balls move axially in the grooves between the nut and spindle. The balls are returned through channels in the spindle nut, creating a circuit in which the balls circulate around the spindle.

  • The advantages of a recirculating ball screw:
  • Significantly lower friction (rolling friction) compared to conventional trapezoidal spindles (sliding friction)
  • Less wear, therefore longer service life
  • Significantly higher accuracy and freedom from backlash compared to normal screw drives such as trapezoidal spindles
  • Higher travel speeds possible

The F205-V drilling/milling machine offers a wide range of applications. The machine is driven by a frequency-controlled 3-phase asynchronous three-phase motor. Thanks to its two-stage gearbox, it has two speed ranges (slow and fast), which can be adjusted using a rotary knob. The reduction ratio ensures a high torque at the work spindle even in the low speed range. The spindle speed is infinitely adjustable from 150 to 2,250 rpm. The machine has clockwise and anti-clockwise rotation. The milling head (Z-axis) is moved by handwheel. The machine also has a fine feed, which can only be used to move the quill in the Z direction. For drilling work, the quill is fed via the star grip on the side. The travel of the quill can be read on the digital drilling depth display. The work spindle has an MK2 tool holder. The dovetail guides on the X, Y and Z axes can be adjusted backlash-free by means of wedge strips. The 500 x 180 mm worktable has three T-slots (12 mm / M10) for clamping workpieces or clamping devices. The work table is adjusted in the X and Y axes using handwheels with vernier. The cross table of the F205-V is equipped with recirculating ball screws for backlash-free and precise movement.

With the ball screw, also known as a ball screw drive, balls inserted into the spindle nut transmit the force between the spindle and nut. As the spindle rotates, these balls move axially in the grooves between the nut and spindle. The balls are returned through channels in the spindle nut, creating a circuit in which the balls circulate around the spindle.

  • The advantages of a recirculating ball screw:
  • Significantly lower friction (rolling friction) compared to conventional trapezoidal spindles (sliding friction)
  • Less wear, therefore longer service life
  • Significantly higher accuracy and freedom from backlash compared to normal screw drives such as trapezoidal spindles
  • Higher travel speeds possible

The F207-V drilling/milling machine offers a wide range of applications. The machine is driven by a frequency-controlled 3-phase asynchronous three-phase motor. Thanks to its two-stage gearbox, it has two speed ranges (slow and fast), which can be adjusted using a rotary knob. The reduction ratio ensures a high torque at the work spindle even in the low speed range. The spindle speed is infinitely adjustable from 150 to 2,250 rpm. The machine has clockwise and anti-clockwise rotation. The milling head (Z-axis) is moved by handwheel. The machine also has a fine feed, which can only be used to move the quill in the Z direction. For drilling work, the quill is fed via the star grip on the side. The travel of the quill can be read on the digital drilling depth display. The work spindle has an MK2 tool holder. The dovetail guides on the X, Y and Z axes can be adjusted backlash-free by means of wedge strips. The 700 x 180 mm worktable has three T-slots (12 mm / M10) for clamping workpieces or clamping devices. The worktable is adjusted in the X and Y axes using handwheels with vernier. The cross table of the F207-V is equipped with recirculating ball screws for backlash-free and precise movement.

With the ball screw, also known as a ball screw drive, balls inserted into the spindle nut transmit the force between the spindle and nut. As the spindle rotates, these balls move axially in the grooves between the nut and spindle. The balls are returned through channels in the spindle nut, creating a circuit in which the balls circulate around the spindle.

  • The advantages of a recirculating ball screw:
  • Significantly lower friction (rolling friction) compared to conventional trapezoidal spindles (sliding friction)
  • Less wear, therefore longer service life
  • Significantly higher accuracy and freedom from backlash compared to normal lead screws such as trapezoidal spindles
  • Higher travel speeds possible

This milling machine is supplied with a glass scale measuring system already installed. In addition to the versatile functions of a measuring system, this serves to display the actual position of a workpiece or tool in a coordinate system. The display and control unit is equipped with a 7 inch (18 cm) LCD screen and various function keys. The screen is attached to the Z-column of the milling machine via a swivelling arm. There is also a practical tool tray underneath the display unit. The X, Y and Z axes of the machine are equipped with glass scales. The fourth axis of the measuring system can be used for optional accessories, such as a rotary table.
The measuring system is characterised by very extensive functions and display options. Selected functions are shown graphically on the display for better understanding. The position display offers the option of choosing between turning, milling and grinding mode. The languages available are German, English, Spanish, French and Chinese.

  • The following functions are available in milling mode:
  • Inclined contour / surface: Milling of phases or diagonal surfaces
  • Setting any number of holes at an even distance on a straight line (SHL function)
  • Milling a radius or circular arc
  • Representation of a bolt hole circle for evenly spaced holes on a circular arc
  • Determining the centre point between two points

  • The following functions are available in turning mode:
  • Taper turning
  • Tool compensation
  • The traverse path in the X-axis can be displayed either in diameter or in radius.
  • It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.

The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. The position display has a standby mode. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.

Please note: The specified travel distances may be reduced if the measuring strips are fitted.

The F307-V drilling/milling machine offers a wide range of applications. The machine is driven by a frequency-controlled 3-phase asynchronous three-phase motor. Thanks to its two-stage gearbox, it has two speed ranges (slow and fast), which can be adjusted using a rotary knob. The reduction ratio ensures a high torque at the work spindle even in the low speed range. The spindle speed is infinitely adjustable from 150 to 2,250 rpm. The machine has clockwise and anti-clockwise rotation. The milling head (Z-axis) is moved by handwheel. The machine also has a fine feed, which can only be used to move the quill in the Z direction. For drilling work, the quill is fed via the star grip on the side. The travel of the quill can be read on the digital drilling depth display. The work spindle has a user-friendly SK30 tool holder. The dovetail guides on the X, Y and Z axes can be adjusted backlash-free using wedge strips. The 700 x 180 mm worktable has three T-slots (12 mm / M10) for clamping workpieces or clamping devices. The work table is adjusted in the X and Y axes using handwheels with vernier. The cross table of the F307-V is equipped with recirculating ball screws for backlash-free and precise movement.

With the ball screw, also known as a ball screw drive, balls inserted into the spindle nut transmit the force between the spindle and nut. As the spindle rotates, these balls move axially in the grooves between the nut and spindle. The balls are returned through channels in the spindle nut, creating a circuit in which the balls circulate around the spindle.

  • The advantages of a recirculating ball screw:
  • Significantly lower friction (rolling friction) compared to conventional trapezoidal spindles (sliding friction)
  • Less wear, therefore longer service life
  • Significantly higher accuracy and freedom from backlash compared to normal screw drives such as trapezoidal spindles
  • Higher travel speeds possible

The F307-V drilling/milling machine offers a wide range of applications. The machine is driven by a frequency-controlled 3-phase asynchronous three-phase motor. Thanks to its two-stage gearbox, it has two speed ranges (slow and fast), which can be adjusted using a rotary knob. The reduction ratio ensures a high torque at the work spindle even in the low speed range. The spindle speed is infinitely adjustable from 150 to 2,250 rpm. The machine has clockwise and anti-clockwise rotation. The milling head (Z-axis) is moved by handwheel. The machine also has a fine feed, which can only be used to move the quill in the Z direction. For drilling work, the quill is fed via the star grip on the side. The travel of the quill can be read on the digital drilling depth display. The work spindle has a user-friendly SK30 tool holder. The dovetail guides on the X, Y and Z axes can be adjusted backlash-free using wedge strips. The 700 x 180 mm worktable has three T-slots (12 mm / M10) for clamping workpieces or clamping devices. The worktable is adjusted in the X and Y axes using handwheels with vernier. The cross table of the F307-V is equipped with recirculating ball screws for backlash-free and precise movement.

With the ball screw, also known as a ball screw drive, balls inserted into the spindle nut transmit the force between the spindle and nut. As the spindle rotates, these balls move axially in the grooves between the nut and spindle. The balls are returned through channels in the spindle nut, creating a circuit in which the balls circulate around the spindle.

  • The advantages of a recirculating ball screw:
  • Significantly lower friction (rolling friction) compared to conventional trapezoidal spindles (sliding friction)
  • Less wear, therefore longer service life
  • Significantly higher accuracy and freedom from backlash compared to normal lead screws such as trapezoidal spindles
  • Higher travel speeds possible

This milling machine is supplied with a glass scale measuring system already installed. In addition to the versatile functions of a measuring system, this serves to display the actual position of a workpiece or tool in a coordinate system. The display and control unit is equipped with a 7 inch (18 cm) LCD screen and various function keys. The screen is attached to the Z-column of the milling machine via a swivelling arm. There is also a practical tool tray underneath the display unit. The X, Y and Z axes of the machine are equipped with glass scales. The fourth axis of the measuring system can be used for optional accessories, such as a rotary table.
The measuring system is characterised by very extensive functions and display options. Selected functions are shown graphically on the display for better understanding. The position display offers the option of choosing between turning, milling and grinding mode. The languages available are German, English, Spanish, French and Chinese.

  • The following functions are available in milling mode:
  • Inclined contour / surface: Milling of phases or diagonal surfaces
  • Setting any number of holes at an even distance on a straight line (SHL function)
  • Milling a radius or circular arc
  • Representation of a bolt hole circle for evenly spaced holes on a circular arc
  • Determining the centre point between two points

  • The following functions are available in turning mode:
  • Taper turning
  • Tool compensation
  • The traverse path in the X-axis can be displayed either in diameter or in radius.
  • It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.

The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. The position display has a standby mode. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.

Please note: The specified travel distances may be reduced if the measuring strips are fitted.

The solidly manufactured F400-G drilling/milling machine is driven by a powerful, 2-stage three-phase motor made in Germany with an output power of
600 / 900 watts. The power is transmitted directly to the 6-stage oil-bath gearbox via a plug-in shaft, ensuring no slippage. The F400-G has twelve spindle speeds from 105 to 3,000 rpm, which can be set using two control levers. The height of the milling head is adjusted using the front-mounted hand crank for the Z-axis. For drilling work, the quill stroke is executed via the star grip mounted on the side; for precise infeed in the Z-axis during milling, the machine has an activatable fine feed. The travel of the quill can be read on the digital drilling depth display.
The dovetail guides on the X, Y and Z axes can be adjusted backlash-free using wedge strips. The 740 x 180 mm swivelling worktable has three T-slots (12 mm / M10) for clamping workpieces or clamping devices. The main switch, the switch for clockwise and anti-clockwise rotation, the torque button, the on/off switch, the switch for the motor speed (level 1 and 2) and the emergency stop button are located on the control unit attached to the side of the milling head.

The solidly manufactured F400-G drilling/milling machine is driven by a powerful, 2-stage three-phase motor made in Germany with an output power of 600 / 900 watts. The power is transmitted directly to the 6-stage oil-bath gearbox via a plug-in shaft, ensuring no slippage. The F400-G has twelve spindle speeds from 105 to 3,000 rpm, which can be set using two control levers. The height of the milling head is adjusted using the front-mounted hand crank for the Z-axis. For drilling work, the quill stroke is executed via the star grip mounted on the side; for precise infeed in the Z-axis during milling, the machine has an activatable fine feed. The travel of the quill can be read on the digital drilling depth display. The dovetail guides on the
X-, Y- and Z-axis can be adjusted backlash-free by means of gibs. The 740 x 180 mm swivelling worktable has three T-slots (12 mm / M10) for clamping workpieces or clamping devices. The main switch, the switch for clockwise and anti-clockwise rotation, the torque button, the on/off switch, the switch for the motor speed (level 1 and 2) and the emergency stop button are located on the control unit attached to the side of the milling head.

This milling machine is supplied with a glass scale measuring system already installed. In addition to the versatile functions of a measuring system, this is used to display the actual position of a workpiece or tool in a coordinate system. The display and control unit is equipped with a 7 inch (18 cm) LCD screen and various function keys. The screen is attached to the Z-column of the milling machine via a swivelling arm. There is also a practical tool tray underneath the display unit. The X, Y and Z axes of the machine are equipped with glass scales. The fourth axis of the measuring system can be used for optional accessories, such as a rotary table.
The measuring system is characterised by very extensive functions and display options. Selected functions are shown graphically on the display for better understanding. The position display offers the option of choosing between turning, milling and grinding mode. The languages available are German, English, Spanish, French and Chinese.

  • The following functions are available in milling mode:
  • Inclined contour / surface: Milling of phases or diagonal surfaces
  • Setting any number of holes at an even distance on a straight line (SHL function)
  • Milling a radius or circular arc
  • Representation of a bolt hole circle for evenly spaced holes on a circular arc
  • Determining the centre point between two points
  • The following functions are available in turning mode:
  • Taper turning
  • Tool compensation
  • The traverse path in the X-axis can be displayed either in diameter or in radius.
  • It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.

The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. The position display has a standby mode. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.

Please note: The specified travel distances may be reduced if the measuring strips are fitted.

Price

€1,749.00*

Content: 1 pcs

€1,689.00*

Content: 1 pcs

€2,299.00*

Content: 1 Piece

€1,689.00*

Content: 1 pcs

€2,419.00*

Content: 1 Piece

€1,899.00*

Content: 1 pcs

€2,439.00*

Content: 1 Piece

Drilling capacity max. [mm]
20
20
20
20
20
25
25
Frequency [Hz]
50
50
50
50
50
50
50
Gross weight [kg]
132
120
132
135
135
230
230
Hole spacing for fastening the machine base [mm]
245 / 220
245 / 220
245 / 220
245 / 220
245 / 220
see hole pattern
see hole pattern
Inclination range of drilling / milling head [°]
+/- 90
+/- 90
+/- 90
+/- 90
+/- 90
+/- 45
+/- 45
Machine base dimensions [mm]
275 x 340
275 x 340
275 x 340
275 x 340
275 x 340
320 x 480
320 x 480
Machine dimensions (LxWxH) [mm]
950 x 560 x 980
750 x 560 x 980
950 x 560 x 980
950 x 560 x 980
950 x 560 x 980
950 x 630 x 1,170
950 x 630 x 1,170
Max. distance between spindle and worktable [mm]
370
370
370
370
370
350
350
Milling capacity cutter head (max.) [mm]
63
63
63
63
63
63
63
Milling capacity finger cutter (max.) [mm]
16
16
16
16
16
20
20
Motor power (P1) [W]
1.000
1.000
1.000
1.000
1.000
850 / 1.360
850 / 1.360
Motor power (P2) [W]
750
750
750
750
750
600 / 900
600 / 900
Net weight [kg]
113
103
113
116
116
182
182
Number of T-slots
3
3
3
3
3
3
3
Packaging dimensions (LxWxH) [mm]
730 x 710 x 900
610 x 560 x 900
730 x 710 x 900
730 x 710 x 900
730 x 710 x 900
710 x 710 x 1,070
710 x 710 x 1,070
Projection [mm]
200
200
200
200
200
170
170
Quill stroke [mm]
50
50
50
50
50
80
80
Size of the T-slots [mm]
12 (M10)
12 (M10)
12 (M10)
12 (M10)
12 (M10)
12 (M10)
12 (M10)
Spindle holder
MK2 / M10
MK2 / M10
MK2 / M10
SK30 / M12
SK30 / M12
SK30 / M12 (DIN 2080)
SK30 / M12 (DIN 2080)
Spindle speed (high range) [rpm].
650 - 2.250
650 - 2.250
650 - 2.250
650 - 2.250
650 - 2.250
-
-
Spindle speed (low range) [rpm].
150 - 650
150 - 650
150 - 650
150 - 650
150 - 650
-
-
Steps Spindle speed
2 - variable
2 - variable
2 - variable
2 - variable
2 - variable
12
12
T-slot spacing [mm]
63
63
63
63
63
63
63
Table rotatable [°]
no
no
no
no
no
+/- 35°
+/- 35°
Table size [mm]
700 x 180
500 x 180
700 x 180
700 x 180
700 x 180
700 x 180
700 x 180
Voltage [V]
230
230
230
230
230
400
400
WEEE reg. no.
EN 95902713
EN 95902713
EN 95902713
EN 95902713
EN 95902713
EN 95902713
EN 95902713
X-axis travel [mm]
480
280
480
480
480
400
400
Y-axis travel [mm]
150
150
150
150
150
150
150
Z-axis travel [mm]
250
250
250
250
250
350
350
Spindle speed [rpm].
-
-
-
-
-
105 - 3.000
105 - 3.000

10 of 54 reviews

Average rating of 4.8 out of 5 stars


93%

6%

0%

2%

0%


Leave a review!

Share your experiences with other customers.

Excellent

Very good

Good

Acceptable

Unsatisfactory

This site is protected by reCAPTCHA and the Privacy Policy and Terms of Use apply.

6 February 2024 12:26

Review with rating of 5 out of 5 stars

Muss man unbedingt haben

Sehr gute Verarbeitung Tisch auf den gesamten Verfahrweg nicht einmal 1 Hundertstel Abweichung. Spindeln sehr leichtgängig . Auch die Pinolen Tiefenanzeige ist sehr genau ,im Hundertstel Bereich. Zusammen mit dem nötigen Zubehör von Paulimot eine lohnende Investition

20 September 2022 12:30

Review with rating of 5 out of 5 stars

Sehr gut so wie erwartet. Schelle und problemlose

Sehr gut so wie erwartet. Schelle und problemlose Lieferung

10 July 2022 05:33

Review with rating of 5 out of 5 stars

Hertr

Habe die Maschine als Terminlieferung bestellt das auch wunderbar funktionierte, die Maschine entspricht voll der Beschreibung und macht einen hochwertigen Eindruck. Zum Aufstellzeitpunkt konnte ich keine Mängel feststellen. Was mir dann aufgefallen ist, dass bei der Beschreibung keine Bemaßung (Durchmesser und Steigung) der verbauten Kugelumlaufspindeln (x Y) und der Trapezspindel ( z ) gemacht wurde.

26 May 2022 16:00

Review with rating of 5 out of 5 stars

Für den Hobbybereich sehr stabile Ausführung. Die

Für den Hobbybereich sehr stabile Ausführung. Die Drehzahlanzeige funktionierte zwar bei der Inbetriebnahme nicht, das war aber mit einem kurzen Anruf beim Service kein Problem und ich konnte es in 5min. beheben.

21 April 2022 16:11

Review with rating of 5 out of 5 stars

Ausgepackt, aufgebaut und ausprobiert. Tadellos. Würde auf

Ausgepackt, aufgebaut und ausprobiert. Tadellos. Würde auf das DRO auf keinen Fall verzichten wollen. Die Genauigkeit ist für den nicht- und semiprofessionellen Bedarf völlig ausreichend. Die MK2-Aufnahme erlaubt z.T. den Austausch von Werkzeugen mit einer entsprechende Drehmaschine und spart damit zusätzliche Kosten. Das der Kegel festsitzt habe ich bisher nicht festgestellt. Die Werkzeuge lassen sich mit der Anziehschraube auch mit Gefühl wieder abdrücken. Mit dem Hammer draufschlagen ist nicht notwendig. Allerdings verbleiben die Werkzeuge auch nicht über längere Zeit in der MK-Aufnahme. Leistungsbedingt muss man sich beim Fräsen schon in Geduld üben. Aber das ist klar, wenn man sich vor dem Kauf die Leistungsdaten ansieht. Die Werkzeugablage unter der DRO-Anzeige kann ich leider kaum nutzen, da die Löcher meist zu groß sind. Verwende sie jetzt um eine Lampe mit Magnetfuß dort zu fixieren. Klappt ganz ordentlich. Wenig befriedigend ist der Späneschutz des vordren Teils der Y-Spindel. Das Blech schränkt den Verfahrweg in Y-

16 January 2022 00:00

Review with rating of 4 out of 5 stars

Bohr-/Fräßmaschine F207-V

Nachdem meine vorherige über 10 Jahre alte Fräsmaschine während meinen laufenden Arbeiten defekt gegangen war, musste ich schnellsten eine Neue haben. Bei Paulimot wurde ich fündig. Die Lieferung erfolgte schnell und gut. Ich wollte schnellstens weiter arbeiten. Jedoch wurde die Maschine ohne Bohreinsatz geliefert. Das ist wie ein Auto ohne Lenkrad. Ein Anruf beim Service ergab, dass die Maschinen generell ohne Einsätze geliefert werden, weil jeder eine andere Vorstellung hat. Aus der Beschreibung zu der Maschine auf der werkseigenen Homepage geht nach wie vor nicht hervor, dass der Einsatz nicht zum Lieferumfang gehört. Mit der Nachbestellung verlor ich wertvolle Zeit. Bis heute ist das in der Beschreibung noch nicht abgeändert worden. Bei dem hohen Preis würde ich immer ein Präzisionsbohrfutter oder ein einfaches Bohrfutter dazu liefern. Ob mit oder ohne Aufschlag. Mit der Maschine bin ich sehr zufrieden. Sie ist sehr präzise. Störend ist die Arbeitsschutzeinhausung vor der Bohr- und Frässpindel. Bei kleinen Fräsern berührt der Schutz den Schraubstock mit dem eingespannten Werkstück. Ich musste entgegen den Arbeitsschutzvorschriften den Schutz abschrauben, um weiter arbeiten zu können. Hier sollte der Hersteller eine bessere Verstellung der Schutzeinhausung veranlassen.

Reply from paulimot: Hallo Herr Gerhard G., vielen Dank für Ihr Feedback zur F207-V. Wir haben bewußt auf die Zugabe eines Bohrfutters verzichtet. Tatsächlich ist es nicht "es jedem recht zu machen". Ein Kunde hätte lieber ein Bohrfutter, der nächste Kunde lieber ein Spannzangenfutter oder einen Schraubstock.... Aus diesem Grunde haben wir auf die Zugabe eines Werkzeuges verzichtet und dies auch NICHT im Lieferumfang aufgelistet. Ihr Hinweis zum Spindelschutz ist richtig, leider muss dieser im geschlossenen Zustand gewissen Anforderungen entsprechen. Ihr paulimot-Team

7 January 2022 00:00

Review with rating of 5 out of 5 stars

Tolle Maschine mit ein par Wermutstropfen

Über den Bestellvorgang, die Lieferung und auch den Service von Paulimot muss ich ja wohl nicht mehr viel sagen! einfach nur super! Nach reichlicher Überlegung habe ich mir nun die F207-V mit digitalem Messystem angeschafft. Ich hatte vorher ein baugleiches Modell der Sieg SX2L. Ich war mit dieser Maschine wirklich zufrieden, jedoch ist die Höhe der Z- Achse bei mir des Öfteren zum Problem geworden. Mit aufgespannten 80mm Niederzugsschraubstock, ER- Spannfutter und einem Fräser bleibt nicht mehr viel Raum für ein Werkstück. Auch die Tischgröße wurde bisweilen knapp. Ein Teilapparat der 110er Klasse wird da schon zu einer platzmäßigen Herausforderung. Bei der Frage der Tischlänge bin ich nach dem Motto " lieber haben und nicht brauchen als brauchen und nicht haben" gegangen. So wurde es also die 207 und nicht die 205. Und wie soll es auch anders sein? kurz darauf war ich froh, den großen Tisch zu haben. Zumal der Preisunterschied zwischen der F205 und der F207 nicht wirklich ins Gewicht fällt. Nachdem ich nun einige Teile gefräst habe, kann ich nur sagen ..... super! kein Vergleich zu meiner vorherigen Maschine! Die größte Herausforderung stellte ich ihr bisher mit einem 40er Messerkopf mit 5 Schneidplatten in St37 bei einer Zustellung von 0,5mm (mehr habe ich mich bisher nicht getraut). Dies hat sie ohne zu Murren und Meckern mit einer sauberen Oberfläche gemeistert. Die verbauten KuS in der X- und Y Achse machen den Tisch leichtgängig. Lediglich die Keilleisten der Führungen mussten bei allen 3 Achsen nachjustiert werden. Über die Digitalanzeige mag man geteilter Meinung sein. Ich hatte an der Kleinen auch eine DRO verbaut. Von daher möchte ich diese Einrichtung nicht mehr missen. Zumal einige Funktionen geboten werden, die ich als wirklich hilfreich empfinde (z. B. Bohrungen auf einem Teilkreis usw.). Was mir gefällt: - ich musste die Maschine nicht erst von Literweise stinkendem Konservierungsöl befreien - durch das höhere Gewicht werden Vibrationen beim Fräsen besser geschluckt - Frästisch ist leichtgängig - bessere justierbarkeit der Keilleisten - wesentlich größerer Bearbeitungsraum als bei der Vorgängerin - kraftvoller Motor - generell das Handling der Maschine Was mir weniger gefällt: - der Sterngriff der Pinole! mit allen drei Hebeln ist der irgendwie immer im Weg. Ich habe gleich mal zwei abgeschraubt. Einer reicht für die Pinole aus. Ich bin der Meinung, dass das eine konstruktive Fehlplanung ist. Der Griff müsste meiner Meinung nach höher. - Fehlende Abdeckung der Führung Y Achse! die Achse ist hinten offen. Ein wunderbares Späne Grab, wo man selbst mit einem Staubsauger nicht richtig hin kommt. Mal ehrlich! hier hätte man durchaus noch einen Schutz spendieren können!! - die untere Befestigung der Führungsabdeckung Z- Achse. Etwas zu tief angebracht, kollidiert mit dem Gehäuse des Glasmaßstabes X- Achse. Abgesehen davon, dass es unschöne Macken gibt, kostet es auch etwas Verfahrweg Y (ja, ich weiß, ich bin kleinlich, aber manchmal ist es genau der Zentimeter, der fehlt ;-)) - bei mir waren zwei MK2 - B16 Aufnahmedorne dabei, aber kein Bohrfutter! Vorschlag von mir: einen Dorn weniger, dafür ein kleines Bohrfutter ;-) - und zu guter Letzt: Es wäre auch schön, wenn gleich eine deutsche Bedienungsanleitung für die Digitalanzeige dabei wäre und diese nicht erst per E- mail angefragt werden muss. Meine rudimentären Englischkenntnisse reichen zwar aus, um nach der Toilette zu fragen, aber bei so etwas wie einer DRO bin ich da ziemlich aufgeschmissen. Im ganzen gesehen denke ich, dass ich mich richtig entschieden habe. Bisher bereue ich den Kauf nicht und bin mit der Maschine zufrieden. Wer so etwas sucht, dem kann ich wirklich empfehlen, sich mit der F205 oder F207 näher zu befassen. Abzuwarten bleibt, ob auch mich der oft beschriebene Zahn Tod des Antriebszahnrades ereilt. Da ich aber eigentlich immer unter den angegebenen Maximalparametern bleibe, hoffe ich, das ich davon noch eine Weile verschont bleibe. Und sollte es doch passieren, muss halt bei Paulimot ein Ersatz bestellt werden. LG

Reply from paulimot: Hallo Mik, vielen Dank für das ausführliche Feedback zur F207-V. Erstmal möchten wir uns für die fehlende Anleitung zum Messsystem entschuldigen, diese ist normalerweise im Lieferumfang der Maschine enthalten. Ihren Hinweis zum "Spänegrab" geben wir sehr gerne an unseren Hersteller weiter, wir versuchen eine gute Lösung hierfür zu finden.

16 November 2021 00:00

Review with rating of 5 out of 5 stars

Noch keinen richtigen Test!

Der erste Eindruck ist gut. Ja über das angebaute Messsystem ,müsste man noch mal reden!

14 November 2021 00:00

Review with rating of 5 out of 5 stars

Vollkommen zufrieden

Was will am mehr: perfekte Lieferung einer guten Maschine, die die Erwartungen bestens erfüllt, über dem reinen Hobbybereich angesiedelt ist und semiprofessionellen Ansprüchen genügt. Bin sehr zufrieden und kann diese Maschine weiterempfehlen.

2 June 2021 00:00

Review with rating of 5 out of 5 stars

Sehr gute Maschine

Seit einem Jahr habe ich eine Paulimot Drehmaschine und bin mit ihr sehr zufrieden. Die Bestellung der Fräsmaschine war unkompliziert, die Lieferung war nach 2 Tagen super schnell, die Maschine war ruckzuck aufgebaut. Ich kann die Firma Paulimot nur weiterempfehlen.

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Paulitschek Maschinen- und Warenvertriebsgesellschaft mbH
Zeppelinstraße 3
89231 Neu-Ulm, Deutschland
+49 731 23232
support@paulimot.de

Shopping basket

Average rating of 4.8 out of 5 stars

Quick-action drill chuck 1-16 mm + taper arbor MK2 / M10 / B18
Article no:
1004
Gross weight:
1,161 kg
€26.50*
Available immediately

Average rating of 4.9 out of 5 stars

ER32 collet set 2 - 20 mm MK2 / M10 in aluminium case
Article no:
11003
Gross weight:
4,255 kg
€120.00*
Available immediately

Average rating of 4.7 out of 5 stars

Clamping claw set 58-piece M10 / 12 mm in case
Article no:
14001
Gross weight:
6,6 kg
€39.50*
Available immediately

Average rating of 4.8 out of 5 stars

Chip tray for milling machines F205-V, F207-V & F307-V
Article no:
5010
Gross weight:
2,1 kg
€21.50* €22.50*
Available immediately

Average rating of 4.7 out of 5 stars

Drilling / boring head set 50 mm MK2 / M10
Article no:
17001
Gross weight:
2,158 kg
€118.00*
Available immediately