Height support for lathe SIEG C2 and SC2
€159.00*
% €201.00* (20.9% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
A height support, also known as a milling support, is used on lathes. It is mounted on the cross slide in place of the top slide. With the help of a height support, it is possible to carry out smaller milling jobs on a lathe. For this purpose, the milling cutter is mounted in the lathe chuck or collet chuck and the workpiece to be machined is clamped in the milling support.
Technical data
| Dimensions (L x W x H) [mm]: | 160 x 65 x 265 |
|---|---|
| Swivelling range [°]: | ± 50 |
| Travelling distance [mm]: | 90 |
| Weight [kg]: | 5,15 |
| Workpiece holder max. [mm]: | 50 |
For smaller milling jobs on lathes
Solid design, made from steel
Swivelling, ± 50°
Dovetail guide with pressure bar
Workpiece holder 50 mm
Description of the
This solid steel height support is suitable for the SIEG C2 and SC2 lathes. The milling support can be attached to the cross slide via the mounting holes on the base using two hexagon socket screws. The height of the carriage of the height support can be adjusted by up to 90 mm using a handwheel. The travel distance can be read off or set using the vernier. The carriage can be clamped in the set position using a tommy screw. This height support is swivelling and can be adjusted by ± 50° in angle. The dovetail guide of the height support can be adjusted backlash-free via a pressure bar.
Scope of delivery
- 1 x height support for SIEG C2 and SC2
- 1 x M6 tommy screw
- 1 x hand crank
- 2 x hexagon socket screw M6 x 16
More about the brand and products fromÂ
