Comparison of wood band saws

When purchasing a wood band saw, the question often arises as to which machine is best suited and what should be considered when buying. Here you will find an overview of our wood band saws. We will introduce you to the individual models and show you the similarities and differences in terms of equipment and area of application. All models are operated via a 230 volt connection and have a rip fence and an angle fence. The rip fence can be switched between the flat and high guide depending on the application. The band saws are also equipped with infinitely variable height adjustment of the upper saw blade guide and an LED work light. Rubberised and ball-bearing mounted cast spoke wheels for smooth running of the saw blade and a table that can be tilted up to 45° are also part of the standard equipment of our wood band saws. A connection piece for an extraction system, a chip drawer, a workpiece pusher and a basic set of tools consisting of a set of Allen keys and an open-end spanner round off the accessories for our wood band saws.

Here is an overview of the technical details of the various models

Table with technical data of MJ9, MJ10, MJ12 and MJ14 wood band saws, including motor power, passage width and height, cutting speed and more.

MJ9 wood band saw - For fine work

The MJ9 is our smallest model and, unlike the three larger machines, is supplied without a base frame. It is powered by a 300 watt motor, is 500 mm long, 420 mm wide and 830 mm high and has a table height of 410 mm. The table measures 300 x 300 mm, can be swivelled and is made of cast aluminium. The throughput width of this wood band saw is 225 mm and the throughput height is 90 mm. The MJ9 has a cutting speed of 635 m/min. Saw bands with widths from 3 to 10 mm can be clamped in this model. The MJ9 is mainly suitable for processing soft and medium-hard wood.

To the MJ9

A round, silver-coloured saw band with teeth. The band is rolled up and lies on a white surface.

The right band saw blades for the MJ9 - Uddeholm steel

Saw blades made of Uddeholm steel, which are produced in Germany, are not hardened and can be reground as required. They are characterised by their high load capacity, long service life and high cutting volume. Even intensive use does not cause excessive wear.

The length of the MJ9 is 1575 mm.
You can choose from the following widths: 6 mm, 8 mm, 10 mm
The thickness varies between 0.4 mm and 0.45 mm
All saw blades that we offer for the MJ9 have 6 teeth per inch. Ideal for processing soft wood.

Choose your saw blade

MJ10 wood band saw - For fine work

The MJ10 is supplied with a base frame. It is powered by a 375 watt motor, measures 670 mm long, 530 mm wide and 1,410 mm high and has a table height of 920 mm. The table measures 360 x 320 mm, can be swivelled and is made of cast aluminium. The throughput width of this wood band saw is 240 mm and the throughput height is 155 mm. The MJ10 has two cutting speeds, one of 400 m/min and one of 800 m/min. Saw bands with a width of 3 to 12.5 mm can be clamped in this model. The MJ10 also has a circular cutter, which can be used to cut clean radii and curves. It is suitable for processing soft and medium-hard wood.

To the MJ10

The right band saw blades for the MJ10 - Uddeholm steel

The length of the MJ10 is 1826 mm
You can choose from the following widths: 6 mm, 8 mm, 10 mm, 12 mm
We have the following thicknesses in our range: 0.4 mm, 0.45 mm, 0.6 mm
The saw blades are available in 4 and 6 teeth per inch

Choose your saw blade

MJ12 wood band saw - For working with larger pieces of wood

The MJ12 wood band saw is one of the larger models in our range and is supplied with a base frame. It has a motor output of 750 watts and is significantly more powerful than the smaller models. The machine is 740 mm long, 600 mm wide and 1600 mm high, with a table height of 990 mm. The table measures 480 x 390 mm, can be swivelled and is made of grey cast iron. The passage width of the MJ12 is 305 mm and the passage height is 165 mm. The wood band saw has two cutting speeds, one of 370 m/min. and one of 800 m/min. Saw bands with a width of 6 to 20 mm can be clamped in the MJ12. Like the MJ10, it has a circular cutter. A special feature of this model is the viewing window for reading the band tension. The MJ12 is also suitable for processing domestic hardwood species

To the MJ12

The right band saw blades for the MJ12 - Uddeholm steel

The length of the MJ12 is 2240 mm.
You can choose from the following widths: 6 mm, 8 mm, 12 mm, 15 mm, 20 mm
We have the following thicknesses in our range: 0.4 mm, 0.45 mm, 0.5 mm, 0.6 mm
The saw blades are available in 4 and 6 teeth per inch

Choose your saw blade

MJ14 wood band saw - For working with larger pieces of wood

The MJ14 is the largest wood band saw in the range and is supplied with a base frame. With a motor power of 1100 watts, it is the most powerful wood band saw. With its dimensions of 850 mm length, 700 mm width and 1,720 mm height, the machine is slightly larger than the MJ12 and has a table height of 1005 mm. The table measures 545 x 515 mm, can also be swivelled and is made of grey cast iron. The passage width of the MJ14 is 340 mm and the passage height is 225 mm. Like the MJ12, this model has two cutting speeds of 370 m/min and 800 m/min. Saw bands with widths from 6 to 25 mm can be clamped in the MJ14. A circular cutter is also installed on this model. The MJ14 is equipped with a viewing window for reading the band tension and is suitable for processing domestic hardwood species.

To the MJ14