Wet whetstone, grit 400 / 1,000
€4.50*
% €5.90* (23.73% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
This double-sided wet grinding stone is suitable for sharpening and finishing straight cutting edges, such as on chisels, plane blades and knives. The combination of coarse and fine grinding sides allows both rough and fine grinding to be carried out using just one stone.
Technical data
| Dimensions [mm]: | 160 x 60 x 28 |
|---|---|
| Grit size: | 400 / 1.000 |
Two grinding sides with grit sizes 400 and 1,000
Coarse side for pre-sharpening blunt cutting edges
Fine side for subsequent re-sharpening
For use with water – no grinding oil required
Non-slip rubber base for a secure grip
Description of the
This combination wet whetstone features two grinding surfaces with different grit sizes. The coarse side, with a 400 grit, is suitable for pre-grinding blunt or slightly damaged cutting edges, as well as for restoring the cutting edge geometry. The finer side, with a 1,000 grit, then allows for a more even finish and further refinement of the cutting edge. The whetstone is used with water. It should be thoroughly soaked before sharpening; for similar water stones, a soaking time of around 10 to 15 minutes is recommended. The grinding surface should also be kept damp whilst working. Sharpening oil is not required. After use, the stone should be cleaned and left to dry completely in a well-ventilated place. The supplied rubber base fits the whetstone snugly and ensures it remains stable and slip-resistant during use. At the same time, it reduces direct contact between the whetstone and the workbench. Measuring 180 × 60 × 28 mm, the whetstone offers a sufficiently large working surface for the controlled sharpening of knives, chisels and plane blades.
Scope of delivery
- 1 x wet whetstone, grit 400 / 1,000
More about the brand and products from
Similar items
