X-axis feed motor for SIEG X3, X3L, SX3 and SX3L
€269.00*
% €363.00* (25.9% saved)Prices incl. 19% VAT. plus Shipping costs
Currently not available
Intended use
A feed motor is used to perform the feed movement of a tool or workpiece automatically and smoothly. In general, feed motors can be attached to all axes of machine tools.
Technical data
| Frequency [Hz]: | 50 |
|---|---|
| Housing dimensions (L x W x H) [mm]: | 215 x 200 x 120 |
| Motor power (P1) [Watt]: | 300 |
| Motor power (P2) [Watt]: | 35 |
| Transmission ratio: | 1:7,5 |
| Voltage [V]: | 230 |
| WEEE reg. no.: | EN 95902713 |
Suitable for X-axis of SIEG X3, X3L, SX3 and SX3L milling machines
Simple assembly
Can be decoupled and the feed speed is infinitely variable
With limit switch for automatic switch-off
Including mounting material and adjustable stops for limit switches
Description of the
This feed motor is suitable for retrofitting to the X-axis of the SIEG X3, X3L, SX3 and SX3L drilling / milling machines. Installation is easy for anyone thanks to the illustrated installation instructions supplied. The feed speed is infinitely variable via a potentiometer. The transmission ratio from the motor shaft to the spindle of the X-axis is 1:7.5. The feed direction can be set via a toggle switch, which also has a zero position. This prevents the feed direction from being inadvertently reversed. To move the machine table manually, the feed motor can be disengaged via the clutch control knob. The feed movement can be switched off via limit switches, which are triggered by adjustable stops.
Scope of delivery
- 1 x X-axis feed motor for SIEG X3, X3L, SX3 and SX3L
- 1 x coupling unit
- 2 x adjustable stop
- 1 x limit switch (2-sided)
- 1 x 230 volt power supply unit
- 1 x set of assembly material
- 1 x detailed, illustrated installation instructions
More about the brand and products fromÂ
24 August 2020 00:00
Tischvorschub
Ich habe den Motor an meiner F400GV montiert für die er eigentlich nicht vorgesehen ist. Das erforderte einige Umbauarbeiten an der Maschine und die Herstellung eines neuen Flansches zwischen Antrieb und Tisch. Bin inzwischen in der Testphase und mit dem Antrieb bisher sehr zufrieden. Er bewegt den Tisch auch in der niedrigsten Geschwindigkeitsstufe problemlos.