Travelling centre point with 7 inserts MK1, 9-piece
€68.50*
% €71.50* (4.2% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centre punch (often also called a centre point or rolling centre punch) is one of the most important tools when working with a lathe. It is inserted into the tailstock as a safety device in order to be able to machine long, thin and heavy workpieces safely and accurately. With its seven interchangeable inserts, this set offers you a wide range of possible applications. The outer taper is particularly suitable for centring hollow bodies such as pipes. The inner taper included in the set can also be used to centre workpieces without a centre. The five centring points enable delicate work on the workpiece. Centre punches are mainly used at higher speeds.
Technical data
| Concentricity (max.) [mm]: | 0,015 |
|---|---|
| Hardness [HRC]: | 50 - 60 |
| Inner diameter of inner cone [mm]: | 5 |
| Length of inner cone [mm]: | 6 |
| Length of outer cone [mm]: | 15 |
| Length of tip [mm]: | 6, 8, 12 |
| Morse taper recording: | MK1 |
| Point angle [°]: | 60 |
| Speed (max.) [rpm]: | 2.000 |
| Tool material: | Cf 53 Steel |
| Total length [mm]: | 120 |
| Ø bearing housing [mm]: | 33 |
| Ø outer cone [mm]: | 13 - 31 |
| Ø tip [mm]: | 5,5, 7, 9, 13,5 |
For securing long, thin and heavy workpieces
Concentricity: 0.015 mm
Supplied with 7 interchangeable inserts for a wide range of applications
Made from tool steel to withstand heavy loads
Further sizes (MK2, MK3, MK4) in our range
Description of the
The centre point has two ball bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2000 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item. The point angle of the centre points is 60°, as is usual for centre points. The angle of the outer cone is 70°.
In contrast to fixed centre points, the tip of rotating centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We can supply you with further centre punches with 7 inserts in sizes MK2 to MK4.
Scope of delivery
- 1 x centre point MK1
- 5 x centre point
- 1 x inner cone
- 1 x outer cone
- 1 x expulsion wedge
More about the brand and products from
The centre point has two ball bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2000 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item. The point angle of the centre points is 60°, as is usual for centre points. The angle of the outer cone is 70°.
In contrast to fixed centre points, the tip of rotating centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We can supply you with further centre punches with 7 inserts in sizes MK2 to MK4.
The centre punch tip has double ball bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2000 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item. The point angle of these centre points is 60°, as is usual for centre points. The angle of the outer cone is 70°.
In contrast to fixed centre points, the tip of rotating centre points rotates with the workpiece, which prevents friction and allows higher speeds.
We can supply you with further centre punches with 7 inserts in sizes MK1, MK3 and MK4.
The centre point has two ball bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2000 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item. The point angle of these centre points is 60°. The angle of the outer cone is 70°.
In contrast to fixed centre points, the tip of rotating centre points rotates with the workpiece, which prevents friction and allows higher speeds.
We can supply you with further centre punches with 7 inserts in sizes MK1, MK2 and MK4.
The centre punch tip has double ball bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2000 rpm. The steel centre points and cones are hardened and ground, which increases the load capacity and service life of this item. The point angle of these centre points is 60°. The angle of the outer cone is 70°.
In contrast to fixed centre points, the tip of rotating centre points rotates with the workpiece, which prevents friction and allows higher speeds.
We can supply you with further centre punches with 7 inserts in sizes MK1, MK2 and MK3.
€68.50*
Content: 1 Piece
€83.50*
Content: 1 Piece
€80.00*
Content: 1 Piece
€106.00*
Content: 1 Piece
10 March 2025 13:54
Eine starke Qualität
Eine starke Qualität
24 January 2024 05:35
gute verarbeitung, für tranport sehr gut verpackt,
gute verarbeitung, für tranport sehr gut verpackt, praktische aufbewahrungsbox
15 December 2020 00:00
Sehr zu empfehlen
Eine sehr gute Zentrierspitze für den semiprofessionellen Einsatz. Gute Rundlaufeigenschaften und einfach auswechselbare Einsätze.
18 May 2019 00:00
War leider nicht in Ordnung
Das Lager hatte einen Schaden, es drehte sich nicht mit. Die Garantieabwicklung war vorbildlich und sehr schnell. Nachdem ich den Mangel per Mail beanstandet habe, kam prompt eine Antwort mit einem kostenfreien Paketaufkleber für die Rücksendung zum Ausdrucken zurück. Am nächsten Tag hatte ich auch schon mein Geld gutgeschrieben. Für diesen tollen Kundendienst gebe ich trotz des Mangels die volle Punktzahl.
Similar articles
